Infolge der Schneefälle und weiteren Wetterbedingungen können Lieferungen verspätet ankommen.
Resoltech WWAS/WB4-Epoxid-Harz Transparent, Gießen
Beim Kauf dieses Artikels sammeln Sie 4 Punkte. Ihre heutige Bestellung umfasst dann 4 Punkte, welche in einen Gutschein mit folgendem Wert umgewandelt werden können: 0,40 €.
Epoxidharz hohe transparenz und stabilität gegen die UV-strahlung für die herstellung von dekorativen teile durch gießen.
Ideal, um teile herzustellen über silikonform, imitieren wasser in blumenkästen und tröge, herstellung von arbeitsplatten, transparente, etc.

Ideal, um teile herzustellen über silikonform, imitieren wasser in blumenkästen und tröge, herstellung von arbeitsplatten, transparente, etc.
Bei einem Mischungsverhältnis von 2/1 im Volumen oder 100/40 im Gewicht werden starre Teile erhalten.
Bei einem Mischungsverhältnis von 1/1 Volumen oder 100/89 Gewicht werden flexible Teile erhalten.
Zeit gel für 500 g mischung bei 22 ° C: 1 stunde mischungsverhältnis 2:1 und 3 stunden für das mischungsverhältnis 1:1 in volumen.
Dicken
Wenn die Dicke des Stückes 10 mm überschreitet, RESOLTECH WWA
Wenn die Dicke des Stückes zwischen 3 und 6 mm beträgt: RESOLTECH WWAS
Netzteil typ
Epoxidharz transparent Resoltech WWAS/WB4 x (1+0.4) kg, zeit, gel von 1 stunde bis 3 stunden, je nach mischungsverhältnis- Wärmebelastbarkeit
- Bis zu 50 ºC
- Verarbeitungszeit
- Bis zu 60 min
- UV-Beständigkeit
- Ja
- Farbe
- Farblos transparent
- Flexibel
- Ja
Nein
ADR (DANGEROUS GOODS)
Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.
* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.
____________________________________________________
PRODUCT
Polyvinyl and Isopropyl alcohol ................................................ 1 L
Ethylmethylketone / Methyl ethyl ketone ................................... 1 L
Acetone .................................................................................... 1 L
Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml
Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L
Resins, Top Coats and Gel Coats ................................................ 5 L
Paints ......................................................................................... 5 L
Styrene and MW Paraffin Solution .............................................. 5 L
_____________________________________________________________
If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.
In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.
* Shippings to Portugal will be always carried by Torrestir
Download Technical Data Sheet
Download Safety Data Sheets
Das könnte dir auch gefallen