Tax incl. Tax excl.

Vacuum pump and accessories

In this section we offer good range of vaccum pumps for most short and medium size processes with composites.

You will also find a wide range of vacuum accessories to help you develop and maintain your vacuum set-up.

Vacuum pumps are typically classified by the horsepower of the motor, the volume of air displaced in cubic meter per hour (CMH) or cubic feet per hour (CFH), type of pumping mechanism (piston, rotary vane, diaphragm, etc.) and the maximum attainable vacuum pressure in Bar or inches of mercury ("Hg.).

It is very important to match the bag size, desired vacuum level, and pressure with that of the pump for best results. While a smaller pump can often attain a desired vacuum level on a large system, it will take much longer to achieve that level. Also, if a leak is present in a system which exceeds the CMH or CFH rating of the pump, even a partial vacuum will be difficult to achieve. If a pump can not achieve full vacuum in less than five to ten minutes, the pump is probably too weak. Selecting the correct pump for an application is based on total area of the mould. By squeezing as much air out of the bag as soon as possible before sealing the bag and applying the vacuum, the work of the pump can be greatly reduced.

Vacuum gauge - Vacuometer QAC2, 1/4M

ACVACU63-1/4M
QAC2, 1/4M vacuum gauge. With glycerin. Maximum service temperature: 60°C
€37.00 €44.77 Tax incl. €37.00 Tax excl.

Mini Electromechanical Vacuum Switch

WUU00930
Small vacuum switch has the function of giving an electrical signal when a certain degree of adjustable vacuum is reached. The pressure differential between the maximum programmed value and the reset value of the idle signal.
Last items in stock
€110.00 €133.10 Tax incl. €110.00 Tax excl.

Vacuum gauge - Vacuometer 1/4M DIAM 63mm

ACVACU63INOX-1/4
Vacuum gauge 1/4M DIAM 63mm full stainless. Without glycerin. Maximum service temperature: 90°C
Out-of-Stock
€115.00 €139.15 Tax incl. €115.00 Tax excl.

Vac-Reg Vacuum Regulator

WVC10VR
Vac-Reg has been designed to provide accurate, controlled vacuum for parts that use honeycomb core. Vac-Reg is a small in-line unit that is easy to use. Each part in the shop can be independently regulated using Vac-Reg. It uses standard 1/4 inch male NPT fittings and will accept AQD 500TF, Airlock 450TF & 550TF quick disconnect fittings.
€147.00 €177.87 Tax incl. €147.00 Tax excl.

Vac-Gauge 40D versatile digital vacuum gauge

VACGAUGE40D
The New Vac-Gauge 40D is a versatile digital vacuum gauge used for leak detection and vacuum determinations under your vacuum bag.
Last items in stock
€299.00 €361.79 Tax incl. €299.00 Tax excl.

WHISPER Ultrasonic Leak Detector

711-202-G11
Whisper is a leak detector ideal for detecting and locating ultrasonic frequencies generated when the following common situations occur: leaks of any gas under pressure or vacuum, electrical arcing, worn bearings and machinery, malfunctions in steam traps and leaking seal.
Last items in stock
€299.00 €361.79 Tax incl. €299.00 Tax excl.

QS5 Vacuum Pump 8,52 m3/h

700-100-P10
QS5 is a 5 CFM pump with premium features without the premium price. Dual voltage operation, brass fittings, and an exhaust demister make QS5 a versatile and durable pump for everyday use. A twoyear over-the-counter warranty ensures QS5 will stand up to daily punishment for years.
€305.00 €369.05 Tax incl. €305.00 Tax excl.

8 liters Metallic Resin Trap

WCO-XE-0500
8 liters metallic resin trap o catchpot. It has three vents of 12 mm diameter and 1 output gap of 10 mm (1/4") screw thread for QAC19 plug.
Out-of-Stock
€315.00 €381.15 Tax incl. €315.00 Tax excl.

Vac Checker® Digital Pressure Gauge

VAC-CHECKER
Only a sealed infusion setup and a high vacuum enables parts of the highest quality made by vacuum infusion. The Vac Checker® by DD-Compound is a digital pressure gauge that measures the absolute pressure and displays the immediate change in pressure digitally. The maintenance-free pressure sensor delivers precise and reliable measurements.
€355.00 €429.55 Tax incl. €355.00 Tax excl.

VACUUM BELL JAR 17L

WCO-XE-620006
This Vacuum Bell is perfect for resin degazing before infusion, silicone degazing for moulds production and for getting rid of air bubbles in any filled casting resin. Supplied with: one vacuometer, one insulation valve and one unloading valve.
Last items in stock
€845.00 €1,022.45 Tax incl. €845.00 Tax excl.

DO10VTL4M 4 m3/h Vacuum Pump

DO10VTL4M
Mini pumpsets, like DO10VTL4M, are independent vacuum-producing units with reduced size. DO10VTL4M is a 230 Volts motor & 50 Hz pump.
Out-of-Stock
€1,699.00 €2,055.79 Tax incl. €1,699.00 Tax excl.

DO20VTL10MBS1 10 m3/h Vacuum Pump

DO20VTL10MBS1
Pumpsets, like DO20VTL10MBS1, are independent vacuum-producing units with reduced size. DO20VTL10MBS1 is a 230 Volts motor & 50 Hz pump.
Out-of-Stock
€1,895.00 €2,292.95 Tax incl. €1,895.00 Tax excl.

DO10VTL4M 4 m3/h Vacuum Pump with 8 liters Resin Trap

DO10VTL4M+Trampa
Mini pumpsets, like DO10VTL4M, are independent vacuum-producing units with reduced size. Ideal for vacuum infusion and vacuum bagging processes in composites. It is a 230 Volts motor & 50 Hz pump.
Out-of-Stock
€2,040.00 €2,468.40 Tax incl. €2,040.00 Tax excl.

20 m3/h Vacuum Pump

4030101021
Vacuum pump with a 20m3/hour flow rate that stands out for having a 20-liter tank for vacuum accumulation. It is a pump with a 230V motor.
Last items in stock
€2,155.00 €2,607.55 Tax incl. €2,155.00 Tax excl.

10 m3/h Vacuum Pump

4030101010
Vacuum pump with a 10m3/hour flow rate that stands out for having a 20-liter tank for vacuum accumulation. It is a pump with a 230V motor.
Out-of-Stock
€2,265.00 €2,740.65 Tax incl. €2,265.00 Tax excl.

Vacuum equipment 21 m3/h, tank of 100 liters, wheels, and account hours

FBB0003357
Vacuum equipment with a flow rate of 21 m3/h, tank of 100 liters, wheels, and service hour counter Vacuum outlet connection valve: 1/2" gas thread
Last items in stock
€3,315.00 €4,011.15 Tax incl. €3,315.00 Tax excl.
Product added to wishlist