Tax incl. Tax excl.

Vacuum Bagging Films

Bagging films are recommended for the moulding of elaborate forms. Advantages : good mechanical and chemical resistance, important elongation rate, non porous, cost effective. The most standard product for vacuum moulding is our polyamide bagging film PA205. Our new high performance bagging film PO180 with a 50 μ thickness helps to reduce wastes. You can also use our new generation of high elasticity extruded advanced copolymer films, like DIABAG, which has exceptional conformable characteristics, particularly when applied to awkward shapes with deep recesses or undercuts. It permits the moulding of complex forms, save time and wastes.

The new nylon bagging film Ref. PO180 limits waste. Used for vacuum moulding, 50µ of PO180 is equivalent to 75µ traditional film. It is available in lay-flat tubing and sheet.

PO180 is suitable with polyester and epoxy resins, its composition based on polyamide and polypropylene provides good mechanical and chemical properties.

ELASTIBAG is a very resistant film developed for debulding operations or for low temperature curing (below 80°C). Associated with sealant tape LSM6000, it allows a large numbers of cycles because the sealant tape don’t dirty the film. Its high deformability of 800% can match the most complex forms without the port.

PO160 Tubular Vacuum Bag 70 microns 100 mm wide (63.66 mm diameter)

FIPO16070100T
Tubular vaccum bag made of copolymer PE CPA PE, green colour, ideal for all types of processes with thermosetting resins: urethane- acrylates, polyester, vinyl ester, epoxy, etc. Ideal for infusion and vacuum compaction processes, developed also for prepregs oven curing at a maximun temperature of 160 °C.
€5.82 €7.04 Tax incl. €5.82 Tax excl.

FIPO180 Tubular Vacuum Bag 50 microns, 30 cm wide

WFIPO1805030T
Tubular vacuum bag made of polyamid/polypropylene for infusion and vacuum bagging using any thermosetting resin. Especially developed for prepregs oven curing at a maximun tempreture of 180 ºC.
€6.00 €7.26 Tax incl. €6.00 Tax excl.

FIPO180 Tubular Vacuum Bag 50 microns, 60 cm wide

WFIPO1805060T
Tubular vacuum bag made of polyamid/polypropylene for infusion and vacuum bagging using any thermosetting resin. Especially developed for prepregs oven curing at a maximun tempreture of 180 ºC.
€12.00 €14.52 Tax incl. €12.00 Tax excl.

FIPO180 Tubular Vacuum Bag 50 microns, 80 cm wide

FIPO1805080T
Tubular vacuum bag made of polyamid/polypropylene for infusion and vacuum bagging using any thermosetting resin. Especially developed for prepregs oven curing at a maximun tempreture of 180 ºC.
€14.40 €17.42 Tax incl. €14.40 Tax excl.

PO160 Tubular Vacuum Bag 70 microns 250 mm wide (159,15 mm diameter)

BV16070250T
Vacuum tubular bag made of copolymer PE CPA PE, green colour, ideal for all types of processes with thermosetting resins: urethane- acrylates, polyester, vinyl ester, epoxy, etc. Ideal for infusion and vacuum bagging processes, developed also for prepregs oven curing at a maximun temperature of 160 °C.
€14.40 €17.43 Tax incl. €14.40 Tax excl.

Vacuum bag PO120 75 microns 120 cm wide

WFIPO120/0120
Vacuum bag of three layers (two external copolymer and one central polyamide ) ideal for composite molding processes by infusion techniques and vacuum compaction.
€21.48 €25.99 Tax incl. €21.48 Tax excl.

PO180 Tubular Vacuum Bag of 50 microns 120 cm wide, 180 ° C

WVC50120TB
PO180 is a polyamide / polypropylene tubular vacuum bag for infusion applications and vacuum bagging with any type of thermosetting resins and for oven curing of prepregs to a maximum temperature of 180 °C.
€27.60 €33.40 Tax incl. €27.60 Tax excl.

Elastibag Reusable Silicone Membrane - 100 cm

WBE0100
ELASTIBAG is a very resistant reusable silicone membrane developed for debulking operations or for low temperature curing (below 80°C).
Last items in stock
€30.60 €37.03 Tax incl. €30.60 Tax excl.

PO180 Tubular Vacuum Bag of 75 microns 120 cm wide, 180 ° C

WVC75120TB
PO180 is a polyamide / polypropylene tubular vacuum bag for infusion applications and vacuum bagging with any type of thermosetting resins and for oven curing of prepregs to a maximum temperature of 180 °C.
€40.56 €49.08 Tax incl. €40.56 Tax excl.

FIPO180 Bagging Film 50 microns 400 cm wide (115 cm folded) - 180 ºC

FIPO18050400-PLI
Polyamide / polypropylene vacuum bag for infusion applications and vacuum bagging with any type of thermosetting resins and for oven curing of prepregs to a maximum temperature of 180 °C. Film width: 400 cm. Roll width: 115 cm (supplied folded).
€49.99 €60.49 Tax incl. €49.99 Tax excl.
Vacuum bag PO180 of 50 microns 400 cm, 180 ºC
  • New

FIPO180 Vacuum Bag 50 microns 150 cm wide

FIPO180-50/150
Polyamide / polypropylene vacuum bag for infusion applications and vacuum bagging with any type of thermosetting resins and for oven curing of prepregs to a maximum temperature of 180 °C.
Out-of-Stock
€447.00 €540.87 Tax incl. €447.00 Tax excl.

FIPO180 Vacuum Bag 50 microns 300 cm wide

FIPO180-50/300
Polyamide / polypropylene vacuum bag for infusion applications and vacuum bagging with any type of thermosetting resins and for oven curing of prepregs to a maximum temperature of 180 °C.
Out-of-Stock
€972.00 €1,176.12 Tax incl. €972.00 Tax excl.

75 microns Vacuum bagging film PO120, 300 cm wide

FIPO120/0300
Vacuum bagging film of three layers (two external copolymer and one central polyamide ) ideal for composite molding processes by infusion techniques and vacuum bagged hand lay-ups. * Temperature resistance: 120 °C * Roll width: 300 cm * Resistant to styrene * Sensitive to UV radiation. Do not expose to sunlight * Elongation at break: between 340-350 %
Last items in stock
€1,020.00 €1,234.20 Tax incl. €1,020.00 Tax excl.

FIPO180 Vacuum Bag 50 microns 200 cm wide

FIPO180-50/0200
Polyamide / polypropylene vacuum bag for infusion applications and vacuum bagging with any type of thermosetting resins and for oven curing of prepregs to a maximum temperature of 180 °C.
Out-of-Stock
€1,150.00 €1,391.50 Tax incl. €1,150.00 Tax excl.

FIPO180 Vacuum Bag 50 microns 400 cm wide

WFIPO0180500400
Polyamide / polypropylene vacuum bag for infusion applications and vacuum bagging with any type of thermosetting resins and for oven curing of prepregs to a maximum temperature of 180 °C.
Out-of-Stock
€1,778.40 €2,151.86 Tax incl. €1,778.40 Tax excl.
Product added to wishlist