Crestabond M1-10 Methacrylate Adhesive Dark Grey colour

Crestabond M1-10 is a toughened, two component acrylic adhesive designed for bonding composites, thermoplastics
and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly
operations, demonstrating excellent impact, peel, shear, compressive strength and fatigue resistance properties across
all bonded parts. Crestabond M1-10 is a primer-less adhesive, requiring only minimal surface cleaning of the substrates
to be bonded and demonstrates high toughness in all assembled parts with a gap filling capability up to 15mm.

Features and Benefits

 Primer-less metal application
 Excellent adhesion to dissimilar substrates
 Fast setting and curing
 High strength and modulus
 Excellent retention of toughness
 Excellent environmental resistance
 Ready-to-use two component adhesive
 Non-sag
 Application on vertical surfaces
 Replaces mechanical fasteners
 Speeds assembly process
 Reduces labour

Characteristics of Crestabond M1-10

Characteristics                                           Typical Value
Working Time/Geltime(1)                              8 – 12 Minutes
Fixture Time(2)                                            16 – 23 Minutes
Gap Filling                                                   1 – 15 mm
Flash Point                                                   12°C
Mixed Colour                                                Available in Black

1. Working time measured with 10g mass of adhesive with 10:1 mix ratio by volume at 24°C.
2. Fixture time defined using an ISO 4587 lap-shear sample, 0.26mm bondline thickness with 23°C ambient temperature achieving
>1.4MPa (203psi), equivalent to approximately 44kg.

Type of supply

Crestabond M1 x 400 ml cartridge, supplied with 3 static mixers

Crestabond M1 x box of 10 cartridges of 400 ml, supplied in a cardboard box with 10 static mixers