Tax incl. Tax excl.
Injection / Casting Polyurethane foam Elastopor 1723/3 35 kg/m3

Injection / Casting Polyurethane Foam low density (35 kg/m3)

WPU3050-2.1
8 Items
€17.94

By buying this product you can collect up to 1 point. Your cart will total 1 point that can be converted into a voucher of €0.10.

€17.94 Tax incl. €14.83 Tax excl.
Tax included

Polyurethane foam for casting or injection applications in any isolation application: refrigerated trucks, walls, roofs, etc.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 4.5 / 5) - 2 feedback(s)

Polyurethane foam for refrigerated insulation in cold storage, warehouses, walls, etc.
It has been developed for use as an insulation filling all kinds of elements in the refrigeration industry (refrigeration cabinets, showcases, exhibitors ...) in the heat (electric water heaters, accumulators, reservoirs ...) in the construction, boats and, in general, in all applications where manual mixing is necessary.

Type of supply

Elastopor 1723/3 35 kg/m3 Injection / Casting Polyurethane Foam x 2.1 kg, supplied in plastic kegs

Elastopor 1723/3 35 kg/m3 Injection / Casting Polyurethane Foam x 10.5 kg, supplied in plastic kegs

8 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

Customers who bought this product also bought:

Ratings and comments from our customers

Score:  
 
 -  
No comments
Score:  
 
 -  
No comments
Product added to wishlist