Tax incl. Tax excl.
Carbon Woven Imitation black twill 200 g / m2

200 g/m2 Black Diolen Fabric 2x2 Twill, 120 cm wide

WPET001-1
14 Items
€19.90
€24.08 Tax incl. €19.90 Tax excl.
Tax excluded

By buying this product you can collect up to 2 point points. Your cart will total 2 points that can be converted into a voucher of €0.20.

High tenacity polyester fabric for manufacturing composite parts of imitation carbon weave. Diolen can be used with most resin systems including polyester, vinyl ester, urethane-acrylate (Crestapol 1250LV) and epoxy. Diolen is a polyester based fibre reasonably close in performance to kevlar but cheaper.

Choose the type of supply



 Calculate Shipping Cost
Ratings and comments from our customers
( 4.0 / 5) - 4 feedback(s)

High tenacity polyester fabric for manufacturing composite parts of imitation carbon weave. Diolen can be used with most resin systems including polyester, vinyl ester, urethane-acrylate (Crestapol 1250LV) and epoxy.

Diolen is a polyester based fibre reasonably close in performance to kevlar but cheaper.

The main properties of Diolen fabrics are: excellent elongation to break, excellent abrasion resistance and low price.

The main applications for this carbon imitation fabric are: body panel car parts, kayaks, canoes and boats where impact and abrasion resistance are important but where material price is also a key fact of consideration.

Diolen is typically combined with glass fibre (either chopped strand mat or woven glass rovings) to improve impact strength to an otherwise brittle glass fibre monolithic laminate. In this laminates, tensile strength, providing stiffness, comes from the glass fibre with the high elongation to break coming from the Diolen polyester fabric. 

Diolen is totally compatible with any laminating process including wet-lay, vacuum bagging, resin infusion and RTM.

Due to its very high elongation to break properties and abrasion resistance mean that it is very difficult to trim parts made from this material. Traditional cutting tools will tend to leave a 'furry' edge which subsequently can be removed using a fine Mirka Abranet grit abrasive sanding pad. Loose fabrics can finally be removed with a sharp knife.

NOTE: With a polyester fabric you will not achieve the same visual finish as with a carbon fabric.

Features:

Fabric Type: 2x2 twill

Weight: 200 gsm

Type of yarn: 167 tex at 0° and 90°

Roll width: 120 cm

Breaking strength: 750 mN / tex

Elongation at break: 13.6 %

Type of supply

200 g/m2 Black Diolen Fabric 2x2 Twill, 120 cm wide x 1 m2, supplied rolled in cardboard box

200 g/m2 Black Diolen Fabric 2x2 Twill, 120 cm wide x 5 m2, supplied rolled in cardboard box

200 g/m2 Black Diolen Fabric 2x2 Twill, 120 cm wide x 25 m2, supplied rolled in cardboard box

Type
Twill
Fixation
No
Width
120 cm
14 Items
8431252000234

Customers who bought this product also bought:

Ratings and comments from our customers

Score:  
 
JESÚS VAZQ..  -   (LA ALGABA, Spain)
No comments
Score:  
 
Tan García  -   (Alcalá de Henares, Spain)
No comments
Score:  
 
manuel igl..  -   (El Albujon - Cartagena, Spain)
Perfecto
Score:  
 
Isidro Lou..  -   (Amadora, Portugal)
No comments
Product added to wishlist