Tax incl. Tax excl.
Carbon Woven Imitation black twill 200 g / m2

200 g/m2 Black Diolen Fabric 2x2 Twill, 120 cm wide

WPET001-1
13 Items
€18.15

By buying this product you can collect up to 1 point. Your cart will total 1 point that can be converted into a voucher of €0.10.

€18.15 Tax incl. €15.00 Tax excl.
Tax included

High tenacity polyester fabric for manufacturing composite parts of imitation carbon weave. Diolen can be used with most resin systems including polyester, vinyl ester, urethane-acrylate (Crestapol 1250LV) and epoxy. Diolen is a polyester based fibre reasonably close in performance to kevlar but cheaper.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 5.0 / 5) - 3 feedback(s)

High tenacity polyester fabric for manufacturing composite parts of imitation carbon weave. Diolen can be used with most resin systems including polyester, vinyl ester, urethane-acrylate (Crestapol 1250LV) and epoxy.

Diolen is a polyester based fibre reasonably close in performance to kevlar but cheaper.

The main properties of Diolen fabrics are: excellent elongation to break, excellent abrasion resistance and low price.

The main applications for this carbon imitation fabric are: body panel car parts, kayaks, canoes and boats where impact and abrasion resistance are important but where material price is also a key fact of consideration.

Diolen is typically combined with glass fibre (either chopped strand mat or woven glass rovings) to improve impact strength to an otherwise brittle glass fibre monolithic laminate. In this laminates, tensile strength, providing stiffness, comes from the glass fibre with the high elongation to break coming from the Diolen polyester fabric. 

Diolen is totally compatible with any laminating process including wet-lay, vacuum bagging, resin infusion and RTM.

Due to its very high elongation to break properties and abrasion resistance mean that it is very difficult to trim parts made from this material. Traditional cutting tools will tend to leave a 'furry' edge which subsequently can be removed using a fine Mirka Abranet grit abrasive sanding pad. Loose fabrics can finally be removed with a sharp knife.

Features:

Fabric Type: 2x2 twill

Weight: 200 gsm

Type of yarn: 167 tex at 0° and 90°

Roll width: 120 cm

Breaking strength: 750 mN / tex

Elongation at break: 13.6 %

Type of supply

200 g/m2 Black Diolen Fabric 2x2 Twill, 120 cm wide x 1 m2, supplied rolled in cardboard box

200 g/m2 Black Diolen Fabric 2x2 Twill, 120 cm wide x 5 m2, supplied rolled in cardboard box

200 g/m2 Black Diolen Fabric 2x2 Twill, 120 cm wide x 25 m2, supplied rolled in cardboard box

13 Items

Customers who bought this product also bought:

Ratings and comments from our customers

Score:  
 
 -   (Alcalá de Henares, Spain)
No comments
Score:  
 
 -   (El Albujon - Cartagena, Spain)
Perfecto
Score:  
 
 -   (Amadora, Portugal)
No comments
Product added to wishlist