300 gsm Biaxial Carbon Fabric +45/-45º C-PLY™ SP BX 300 C2,5 24K T620S, width 127 cm (SPOT)

300 g/m2 biaxial carbon fabric for high performance applications where high strength and low weight are required. Produced with two 150 g/m2 layers of unidirectional fabric, oriented at +45° and -45°. Suitable for manufacturing of composite parts and tools with epoxy, urethane-acrylate or vinyl ester resins by hand lay-up, infusion or RTM.

C-PLY™ is a range of multiaxial carbon reinforcement (Non Crimp Fabric or NCF) developed using the most advanced technology and tow spreading process.

C-PLY™ SP BX 300 T2,5 24 K is a 300 gsm biaxial spread-tow carbon NCF, +45°/-45°, 150 gsm/ply.
It is made using Toray 24K T600S carbon fibre.
The carbon fibre spreading process enables the manufacture of lightweight plies combined using a tricot stitch.

• Yarn Type: 24K (24,000 filaments per strand of yarn).Toray T600S with a Tensile Strength of 4300 MPa and a Tensile Modulus of 235 GPa.
  
• Yield: 1850 g/1000 m
• Assembly: Stitching Tricot Polyester 2.5mm
• Roll width: 127 cm.
• Fabric manufacturer: Chomarat

Type of supply

300 gsm Biaxial carbon fabric +45º/-45º, C-PLY™ SP BX 300 C2,5 24K T620S x 1 m (1,27 m2), supplied rolled in cardboard box

300 gsm Biaxial carbon fabric +45º/-45º, C-PLY™ SP BX 300 C2,5 24K T620S x 5 m (6,35 m2), supplied rolled in cardboard box

300 gsm Biaxial carbon fabric +45º/-45º, C-PLY™ SP BX 300 C2,5 24K T620S x 25 m (31,75 m2), supplied rolled in cardboard box

300 gsm Biaxial carbon fabric +45º/-45º, C-PLY™ SP BX 300 C2,5 24K T620S x 50 m (63,5 m2), supplied rolled in cardboard box