Tax incl. Tax excl.
Crystic 253PA epoxy compatible white spray Polyester Gel Coat

Crystic 253PA Epoxy Compatible White Spray Polyester Gel Coat

WGC253WHITE-1
10 Items
€20.69

By buying this product you can collect up to 2 points. Your cart will total 2 points that can be converted into a voucher of €0.20.

€20.69 Tax incl. €17.10 Tax excl.
Tax included

Crystic Gelcoat 253PA is a thixotropic, pre-accelerated, isophthalic gelcoat designed as an in-mould gelcoat with excellent adhesion to epoxy resins without the need for a tie-coat. Formulated for spray application. The use of Resoltech 1050 epoxy resin is recommended.

Crystic Gelcoat 253PA is designed for use with wet lay and vacuum injected epoxy systems.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 5.0 / 5) - 2 feedback(s)
Display details of ratings

Crystic Gelcoat 253PA is a thixotropic, pre-accelerated, isophthalic gelcoat designed as an in-mould gelcoat with excellent adhesion to epoxy resins without the need for a tie-coat. Formulated for spray application.

The use of Resoltech 1050 epoxy resin is recommended.

Crystic Gelcoat 253PA is designed for use with wet lay and vacuum injected epoxy systems.

It is not recommended for use in any application which is subject to continuous immersion in water.

It is also not recommended for epoxy pre-pregs.

Gel time of 10 minutes at 25 ° C , with 2% of Catalyst MEKP 50% (Luperox K1S or Butanox M50).

HDT: 76 °C.

Type of supply

Crystic 253PA Epoxy Compatible White Spray Polyester Gel Coat x 1 kg, supplied with 20 g of MEKP catalyst

Crystic 253PA Epoxy Compatible White Spray Polyester Gel Coat x 5 kg, supplied with 100 g of MEKP catalyst

Crystic 253PA Epoxy Compatible White Spray Polyester Gel Coat x 25 kg, supplied with 0,5 kg of MEKP catalyst

10 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

Customers who bought this product also bought:

Cosmetic glass veil C 30 g / m2
Fibre Reinforcements

30 g/m2 Light Weight C-Glass Surface Veil

WVS0300
 (5)
€2.66 €2.66 Tax incl. €2.20 Tax excl.
Lightweight 30g/m2 C (chemical) glass surface veil with a soluble emulsion binder for hand-layup processes. Our glass surface veil is suitable for a broad range of applications and is ideal for use in composites. The material offers an extensive range of properties including corrosion resistance, high thermal stability, excellent resin uptake, dielectric...
View

Ratings and comments from our customers

Score:  
 
 -   (Reims, France)
bon produis
Score:  
 
 -   (Agramunt, Spain)
Muy bien todo
Product added to wishlist