Crystic Topcoat 65PAX Anti-Slip White 337 Brush Isophthalic Polyester Topcoat

Crystic Topcoat 65PAX Anti-Slip White 337 is a pre-accelerated isophthalic topcoat, filled with anti-slip low density anti-slip particles. It has been formulated for brush application and is available in a restricted range of colours.

Crystic Topcoat 65PAX Anti-Slip White 337 is designed for use where an anti-slip surface is required on the reverse side of a laminate.

Crystic Topcoat 65PAX Anti-Slip White 337 has low styrene emission. It is not air inhibited, and produces a matt finish. 

Crystic Topcoat 65PAX Anti-Slip White 337 anti-slip should be allowed to attain workshop temperature (18 ºC - 20 ºC) before use. Stir well by hand, or with a low shear mixer to avoid aeration, and then allow to stand to regain thixotropy. Crystic Topcoat 65PAX Anti-Slip White 337 requires only the addition of catalyst to start the curing reaction. The recommended catalyst is Butanox M50 (or other equivalent catalyst), which should be added at 2% into the topcoat. (Please consult our Technical Service Department if other catalysts are to be used). The catalyst should be thoroughly incorporated into the topcoat, with a low shear mechanical stirrer where possible. 

Gel time at 20 ºC with 2% of MEKP catalyst: 15 minutes

Type of supply

Crystic Topcoat 65PAX Anti-Slip White 337 Brush Polyester Isophthalic Top coat x 1 kg, supplied with 20 g of catalyst MEKP

Crystic Topcoat 65PAX Anti-Slip White 337 Brush Polyester Isophthalic Top coat x 5 kg, supplied with 100 g of catalyst MEKP

Crystic Topcoat 65PAX Anti-Slip White 337 Brush Polyester Isophthalic Top coat x 27 kg, supplied with 0.5 kg of catalyst MEKP