Tax incl. Tax excl.
Barriercoat Crestacoat 5000PA

Crystic Barriercoat 550PA, Isophthalic Polyester Barriercoat for Improved Aesthetics White 337

BC0550PAW337-1
5 Items
€21.04

By buying this product you can collect up to 2 points. Your cart will total 2 points that can be converted into a voucher of €0.20.

€21.04 Tax incl. €17.39 Tax excl.
Tax included

Crystic Barriercoat 550PA is an isophthalic barriercoat formulated for brush application. Crystic Barriercoat 550PA is recommended for use where good surface aesthetics are required for glass reinforced laminates.  It is particularly recommended for use behind dark colour gelcoats and for vacuum infusion.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

Introduction

Crystic Barriercoat 550PA is an isophthalic barriercoat formulated for brush application.

Applications

Crystic Barriercoat 550PA is recommended for use where good surface aesthetics are required for glass reinforced laminates. It is particularly recommended for use behind dark colour gelcoats and for vacuum infusion. For marine applications, use above the water line only.

Formulation

Crystic Barriercoat 550PA should be allowed to attain workshop temperature (18 - 20°C) before use. Crystic Barriercoat 550PA requires only the addition of catalyst to start the curing reaction. The recommended catalyst is Butanox M50 (or other equivalent catalyst) which should be added at 2% by weight into the barrier gelcoat with a low shear mechanical stirrer where possible. (Please consult our Technical Service Department if other catalysts are to be used).

Pot Life

The pot life of Crystic Barriercoat 550PA is approximately 9 minutes at 25°C.

Application

Crystic Barriercoat 550PA is designed to be used behind a standard gelcoat and should be applied when the gelcoat has reached sufficient cure for normal lamination to take place. It should be applied by brush application to a recommended thickness of 1 mm. It is recommended that the barrier gelcoat layer is as even as possible. As a guide, approximately 1.4 kg/m2 of barrier gelcoat mixture will give the required thickness when evenly applied.

Additives

Crystic Barriercoat 550PA is supplied ready for use. The addition of any additives may adversely affect the performance of this product and therefore should not be used.

Recommended Testing

It is recommended that customers test Crystic Barriercoat 550PA before use under their own conditions of application to nsure the required surface finish is achieved.

Physical Data - Uncured

The following tables give typical properties of Crystic Barriercoat 550PA when tested in accordance with SB, BS EN or BS EN ISO test methods.

* Curing Schedule - 24 hours at 20°C, 3 hours at 80°C.
†Curing Schedule - 24 hours at 20°C, 5 hours at 80°C, 3 hours at 120°C.

Type of supply

Barriercoat Crestacoat 550 PA x 1 kg, supplied with 20 g of MEKP catalyst

Barriercoat Crestacoat 550 PA x 5 kg, supplied with 100 g of MEKP catalyst

Barriercoat Crestacoat 550 PA x 25 kg, supplied with 0.5 kg of MEKP catalyst

5 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

Customers who bought this product also bought:

Product added to wishlist