Tax incl. Tax excl.
Recapoli 957TPA Orthopthalic Polyester Resin
Recapoli 957TPA Orthopthalic Polyester
  • New
Recapoli 957TPA Orthopthalic Polyester Resin
Recapoli 957TPA Orthopthalic Polyester

Recapoli 957TPA Orthopthalic Polyester Resin

RP957TPA-1
0 Items
Product available with different options
€9.90

No reward points for this product.

€9.90 Tax incl. €9.90 Tax excl.

RECAPOLI 957TPA is a thixotropic and preaccelerated, orthophthalic, low reactivity unsaturated polyester resin. It contains special additive for reducing styrene emissions in the workshop. It provides cured laminate a tack-free surface.
The resin contains a peroxide indication system, which offers a color change from bluish to pale green after addition of catalyst.
It meets the requirements of EU legislation.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

RECAPOLI 957TPA is a thixotropic and preaccelerated, orthophthalic, low reactivity unsaturated polyester resin. It contains special additive for reducing styrene emissions in the workshop. It provides cured laminate a tack-free surface.
The resin contains a peroxide indication system, which offers a color change from bluish to pale green after addition of catalyst.
It meets the requirements of EU legislation.

Applicación 

RECAPOLI 957TPA is recommended for the production of fibreglass parts used in many sectors: boats manufacturing, household equipment, building and industry purposes. The hardening is carried out by addition of 1% MEKP-50 (Luperox K1S).

Unsatured polyester RECAPOLI 957TPA resin has to be homogenized well before use. It is cured with the following hardening system: Add 10g of MEKP catalyst 50 (Luperox K1S) to 1000 g of resin. The mixture must be well homogenized and then used for preparation of the details. The viability of the mixture is from 25 to 30 minutes and depends on the room and resin temperature, as the process of gelling accelerates at temperatures higher than 25°C. On the contrary, lower temperature will increase geltime.

Storage

The packed unsatured polyester resin must be stored in closed, dry and fire prevented storage areas, protected from direct sunlight and at temperature no higher than 25°C if possible. High temperatures will reduce the shelf-life of the resin.
Prolonged storage can reduce the effect of the accelerator. An addition of 0.5-1.0% Co 1% may be necessary to restore the original pot life.
Storage shelf life – 4 months from the production date.

Safety

Please refer to the Material Safety Data Sheet for further information about safe storage, use and handling of Recapoli 957TPA.

Type of supply

- RECAPOLI 957TPA Resin x 1 Kg supplied with 20 g PMEC catalyst included

- RECAPOLI 957TPA Resin x 5 Kg supplied with 100 g PMEC catalyst included

- RECAPOLI 957TPA Resin x 25 Kg supplied with 0.5 Kg PMEC catalyst included

- RECAPOLI 957TPA Resin x 220 Kg supplied with 5 Kg PMEC catalyst included

- RECAPOLI 957TPA Resin x 1000 Kg supplied in an IBC container with 25 Kg PMEC catalyst included

UV resistance
No
Colour
Pale green after catalysis
Flexible
No
Type
ORTHO
Tixo
Yes
Low shrinkage
No
Fire retardant
No
Low styrene emission
Yes
Food contact
No
0 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

Product added to wishlist