Tax incl. Tax excl.
300 gsm Forged Carbon Prepreg SPX25071 SFP-45%RW
300 gsm Forged Carbon Prepreg SPX25071 SFP
300 gsm Forged Carbon Prepreg SFP
300 gsm Forged Carbon Prepreg SPX25071 SFP-45%RW, 1250mm wide
  • New
300 gsm Forged Carbon Prepreg SPX25071 SFP-45%RW
300 gsm Forged Carbon Prepreg SPX25071 SFP
300 gsm Forged Carbon Prepreg SFP
300 gsm Forged Carbon Prepreg SPX25071 SFP-45%RW, 1250mm wide

300 gsm Forged Carbon Prepreg SE140/SFP/HEC-45%RW, 1250mm wide

PA33-7340-1
5 Items
€65.00

By buying this product you can collect up to 6 points. Your cart will total 6 points that can be converted into a voucher of €0.60.

€65.00 Tax incl. €65.00 Tax excl.

SE140 Forged Carbon is a 140°C TG epoxy short fibre prepreg system (SFP) suitable for thinner wall sections and lower pressure processing than traditional Carbon Fibre SMC (CSMC). 

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

SE140 Forged Carbon SFP is a 140°C TG epoxy short fibre prepreg system (SFP) suitable for thinner wall sections and lower pressure processing than traditional Carbon Fibre SMC (CSMC). 

This product is recommended for compression moulding applications with press cure times as short as 10 mins at 130-135°C (266-275°F). Unlike traditional CSMC this product offers further processing options giving flexibility for low cost prototyping before commencing series production. It can be used as a traditional prepreg by cutting then manually draping plies to laminate a part which can be vacuum or autoclaved cured to improve the surface finish.

SE 140 SFP resin is a clear resin and is not filled, which creates the unique fibre look. However it is not UV stable and will gradually become more yellow on exposure to UV light so a protective clear coat is recommended when making visual parts.

  • Short Fibre (12mm) Carbon Prepreg suitable for compression moulding, autoclave, and vacuum processing with low distortion
  • Balance of cure speed and resin flow for high quality, low void content laminates
  • Available as 1250mm wide, 45% Resin Content
  • Cut and laminate like a traditional prepreg for vacuum and autoclave parts
  • Form a near net shaped preform to compression mould at low pressure (1-20 bar)
  • Alternatively stack multiple plies together & compression mould as CSMC (60bar)
  • VOC Free
  • 10min Cure at 130-135C (266-275°F)
  • 8 week Shelf Life at 21°C (70°F) or 12 months at -18°C (0°F)

Prepreg properties

PROPERTY UNIT SFP (HEC) 450g/m2 45%
Resin System - SE140
Prepreg Format - Short Fibre Prepreg (SFP)
Fibre / Fabric Style - Random
Fabric Areal Weight g/m2 450
Typical Fibre Length mm 12
Typical Fibre Density kg/m3 1800
Typical Resin Density kg/m3 1194
Fibre Modulus GPa 227 - 257
Resin Content % 45
Nominal Prepreg Areal Weight g/m2 833
Nominal Cured Ply Thickness mm 0.57
Nominal Fibre Volume Fraction % 45
Nominal Cured Density kg/m3 1465

 

Prepreg mechanical propierties

 

PROPERTY 10 HRS @ 80°C (176°F)   30 MINS @ 120°C (248°F)
Tensile Modulus 3.8 GPa 3.1 GPa
Tensile Strength 65 MPa 62 MPa
Tensile Elongation % 2.00 % 2.45 %
Flexural Modulus 3.8 GPa 3.3 GPa
Flexural Strength 132 MPa 119 MPa
Compressive Strength 191 MPa 165 MPa
Tg1 by DMA °C 110 133

  • Minimum Viscosity: 1.4 Pa.s / 14P
  • Temperature at Minimum Viscosity: 92°C / 198°F

Types of Supply

450 gsm Forged Carbon Prepreg SE140/SFP/HEC-45%RW, 1250mm wide x 1 m2

450 gsm Forged Carbon Prepreg SE140/SFP/HEC-45%RW, 1250mm wide x 5 m2

450 gsm Forged Carbon Prepreg SE140/SFP/HEC-45%RW, 1250mm wide x 25 m2

5 Items

Prepregs can be sent by express carrier. Unfortunately there is no refrigerated transport available for Europe. 

The following considerations might be taken into account:

The shelf life of a prepreg at 20 ºC is aprox. 25 days.

10-15 days at 30º C

5-10 days for temperatures over 40 ºC

Product added to wishlist