245 g/m2 Carbon - Epoxy Prepreg MTC510-C245T VWEAVE-HS-3K-42%RW Twill 2x2
By buying this product you can collect up to 9 points. Your cart will total 9 points that can be converted into a voucher of €0.90.
MTC510 Carbon-epoxy prepreg is manufactured with a high tenacity epoxy resin prepared to cure between a variable temperature range of 80 ° C and 120 ° C. It is used to manufacture composite parts. The carbon twill fabric comes in a finish in which the diagonals, typical of twill weave, converge in the center of the sheet forming a V pattern.

MTC510 Carbon-epoxy prepreg is manufactured with a high tenacity epoxy resin prepared to cure between a variable temperature range of 80 ° C and 120 ° C. It is used to manufacture composite parts. The carbon twill fabric comes in a finish in which the diagonals, typical of twill weave, converge in the center of the sheet forming a V pattern.
Key Features & Benefits
- Weight: 245 g/m2
- Carbon type: 2 x 2 twill, 3K.
- Roll Width: 1250 mm.
- Epoxy resin weight content: 42%.
- Cure temperature from 80°C - 120°C
- Service temperatures up to 135°C after postcure.
- Low CTE and shrinkage.
- Work life at 20°C: 28 days.
- Storage life at -18°C: 12 months.
- Very low VOC content – no added solvents during manufacture.
- Excellent surface finish.
Storage & Out Life
The material should be kept frozen at -18°C. It must be kept sealed in a polythene bag which must not be opened until fully thawed to room temperature. If the material is not fully used, then the material must be resealed in the polythene bag to prevent moisture absorption.
Type of supply
245 g/m2 Carbon - Epoxy Prepreg MTC510-C245T VWEAVE-HS-3K-42%RW x 1 m2, supplied rolled in cardboard box
245 g/m2 Carbon - Epoxy Prepreg MTC510-C245T VWEAVE-HS-3K-42%RW x 5 m2, supplied rolled in cardboard box
245 g/m2 Carbon - Epoxy Prepreg MTC510-C245T VWEAVE-HS-3K-42%RW x 25 m2, supplied rolled in cardboard box
Prepregs can be sent by express carrier. Unfortunately there is no refrigerated transport available for Europe.
The following considerations might be taken into account:
The shelf life of a prepreg at 20 ºC is aprox. 25 days.
10-15 days at 30º C
5-10 days for temperatures over 40 ºC