Tax incl. Tax excl.
E-glass-Epoxy Prepreg MTC510-UD600-EGLASS-35%RW, Width 300 mm
E-glass-Epoxy Prepreg MTC510-UD600-EGLASS-35%RW, Width 300 mm
  • New
E-glass-Epoxy Prepreg MTC510-UD600-EGLASS-35%RW, Width 300 mm
E-glass-Epoxy Prepreg MTC510-UD600-EGLASS-35%RW, Width 300 mm

E-glass-Epoxy Prepreg MTC510-UD600-EGLASS-35%RW, Width 300 mm

SHD2465-300P-1
24 Items
€45.00

By buying this product you can collect up to 4 points. Your cart will total 4 points that can be converted into a voucher of €0.40.

€45.00 Tax incl. €45.00 Tax excl.

MTC510 is an epoxy resin system designed to cure between 80°C and 120°C allowing flexibility in component manufacture. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format.

Supply

 Calculate Shipping Cost
Shipping:
0
to España via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

MTC510 is an epoxy resin system designed to cure between 80°C and 120°C allowing flexibility in component manufacture. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format.

Key Features & Benefits

  • Reinforcement fibre type: Unidirectional E Glass.
  • Weight: 600 gsm.
  • Roll Width: 300 mm.
  • Content of epoxy resin: 35 % by weight.
  • Cure temperature from 80°C - 120°C
  • Service temperatures up to 135°C after postcure.
  • Low CTE and shrinkage.
  • Work life at 20°C: 28 days.
  • Storage life at -18°C: 12 months.
  • Very low VOC content – no added solvents during manufacture.
  • Excellent surface finish.

Storage & Out Life

The material should be kept frozen at -18°C. It must be kept sealed in a polythene bag which must not be opened until fully thawed to room temperature. If the material is not fully used, then the material must be resealed in the polythene bag to prevent moisture absorption.

Type of Supply

E-glass-Epoxy Prepreg MTC510-UD600-EGLASS-35%RW, Width 300 mm x 1 m2, supplied rolled in cardboard box

E-glass-Epoxy Prepreg MTC510-UD600-EGLASS-35%RW, Width 300 mm x 5 m2, supplied rolled in cardboard box

E-glass-Epoxy Prepreg MTC510-UD600-EGLASS-35%RW, Width 300 mm x 25 m2, supplied rolled in cardboard box

24 Items

Prepregs can be sent by express carrier. Unfortunately there is no refrigerated transport available for Europe. 

The following considerations might be taken into account:

The shelf life of a prepreg at 20 ºC is aprox. 25 days.

10-15 days at 30º C

5-10 days for temperatures over 40 ºC

Product added to wishlist