300 gsm Unidirectional Carbon-Epoxy Prepreg MTC510-UD300-HS-Panex 50K-33%RW, 300 mm wide

MTC510 is an epoxy resin system designed to cure between 80°C and 120°C allowing flexibility in component manufacture. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format.

Key Features & Benefits

• Weight: 300 g/m2.
• Carbon type: unidirectional 50K Panex 35
• Roll Width: 300 mm.
• Epoxy resin weight content: 33%.
• Cure temperature from 80°C - 120°C
• Service temperatures up to 135°C after postcure.
• Low CTE and shrinkage.
• Work life at 20°C: 28 days.
• Storage life at -18°C: 12 months.
• Very low VOC content – no added solvents during manufacture.
• Excellent surface finish.

Storage & Out Life

The material should be kept frozen at -18°C. It must be kept sealed in a polythene bag which must not be opened until fully thawed to room temperature. If the material is not fully used, then the material must be resealed in the polythene bag to prevent moisture absorption.

Type of supply

300 gsm Unidirectional MTC510-UD300-HS-Panex 50K-33%RW x 1 m2, supplied rolled in cardboard box

300 gsm Unidirectional MTC510-UD300-HS-Panex 50K-33%RW x 5 m2, supplied rolled in cardboard box

300 gsm Unidirectional MTC510-UD300-HS-Panex 50K-33%RW x 25 m2, supplied rolled in cardboard box