Tax incl. Tax excl.
Resolcoat 3010T/3014T

Resolcoat 3010T/3014T Epoxy High Build Surfacer

WRE3014-1.15
4 Items
€57.96

By buying this product you can collect up to 5 points. Your cart will total 5 points that can be converted into a voucher of €0.50.

€57.96 Tax incl. €47.90 Tax excl.
Tax included

RESOLCOAT 3010T is a high build surfacer formulated to create a barrier against water and chemicals to protect a yacht hull as well as providing a perfect surface finish and interface for all marine topcoats.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 5.0 / 5) - 1 feedback(s)

RESOLCOAT 3010T is a high build surfacer formulated to create a barrier against water and chemicals to protect a yacht hull as well as providing a perfect surface finish and interface for all marine topcoats.

The system is easy to apply by spray, roller or brush and is fast drying. A suitable finish is obtained after at least two coats of this system. Suitable for steel, aluminium, GRP and wooden yachts.

Mixture ratio of 100: 15 by weight, or 4: 1 by volume.

Gel time: 16 h for 1 liter.

Use thinner 3018 for spray applications: approximately 10-15%.

SPRAYING: Pressure required: Airless:150kg/cm2. Use 0.46/0.69mm nozzles thinned with
RESOLTECH 3018 thinner at 10 to 15%. If sprayed without using thinner with a classic gravity
spray gun, use a nozzle of 2,6 mm with min 4-6 bar air pressure.
COVERAGE: 4m2 per kg. on average for a 100 microns dry layer (recommended amount/layer)
Several layers can be applied until a fair surface is obtained (usually 2 coats ). No sanding is required
between coats. Once cured, the filler can be sanded with an orbital sander.
“Pinholes” should be treated with a mixture of Resolcoat 3010T and HP510 glassbubbles. Do not
use another filler as it may create “hard points”. Avoid thick coats that may lead to solvent entrapment.
Tools should be cleaned with acetone, thinner or any equivalent product.

Type of supply

Resolcoat 3010T/3014T Epoxy High Build surfacer x (1+0.15) kg

Resolcoat 3010T/3014T Epoxy High Build surfacer x (4+0.6) kg

Resolcoat 3010T/3014T Epoxy High Build surfacer x (20+3) kg

4 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Epoxy adhesives and putties ...................................................... 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

You might also like

Customers who bought this product also bought:

Ratings and comments from our customers

Score:  
 
 -   (Porto Salvo, Portugal)
No comments
Product added to wishlist