Tax incl. Tax excl.
 Vinylester resin -DCPD Crystic VE679PA

Crystic VE679PA Hand Lay-Up Vinyl Ester-DCPD Resin

WRV0679-1
24 Items
€19.79

By buying this product you can collect up to 1 point. Your cart will total 1 point that can be converted into a voucher of €0.10.

€19.79 Tax incl. €16.35 Tax excl.
Tax included

Crystic Resin VE679PA is a pre-accelerated thixotropic DCPD modified vinylester resin. Developed for use as a skin coat in marine and tooling applications. Excellent blister resistance and reduced print through.  It has a 23 minute geltime and is Lloyd´s Register approved.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 5.0 / 5) - 1 feedback(s)

Crystic Resin VE679PA is a pre-accelerated thixotropic DCPD modified vinylester resin. Developed for use as a skin coat in marine and tooling applications. Excellent blister resistance and reduced print through. 

Crystic VE 679PA has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable mouldings with an enhanced surface finish.

Crystic VE 679PA is approved by Lloyd’s Register of Shipping for use in the construction of craft under their survey.

Crystic VE 679PA must be thoroughly stirred and allowed to attain workshop temperature (18°C - 20°C) before use. It needs only the addition of a catalyst to start the curing reaction. Either Butanox LPT or Butanox M50 catalyst can be used, which should be added at 2% into the resin.

Gel time with 2% of MEKP for 100 g at 25 ºC: 23 min.

Deflection Temperature under load† (1.80 MPa): 94 ºC, after 24 hrs at 20°C + 3hrs at 80°C.

 

Type of supply

Crystic VE679PA Hand Lay-Up Vinyl Ester-DCPD resin x 1 kg, supplied with 20 g of MEKP

Crystic VE679PA Hand Lay-Up Vinyl Ester-DCPD resin x 5 kg, supplied with 100 g of MEKP

Crystic VE679PA Hand Lay-Up Vinyl Ester-DCPD resin x 25 kg, supplied with 0.5 kg of MEKP

Heat resistance
Up to 100 ºC
Colour
Red/Brown
Type
DCPD
Tixo
Yes
Low shrinkage
Yes
Lloyd´s Register or Norske Veritas
Yes
24 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

You might also like

Customers who bought this product also bought:

Ratings and comments from our customers

Score:  
 
 -  
Funciona fantásticamente con la fibra de vidrio y el resultado espectacular, un molde de gran rigidez.
Product added to wishlist