By buying this product you can collect up to
2
points.
Your cart will total 2
points that can be converted into a voucher of
€0.20.
Crestapol 1260 is a low viscosity urethane acrylate resin for use in pultrusion, filament winding, RTM and vacuum infusion applications. This is a tough resin, compatible for use with carbon fibre or any other fabric.
Crestapol 1260 is an urethane acrylate resin of low viscosity specially designed for manufacturing composite parts using infusion, RTM, pultrusion and filament winding processes at room temperature. It may be infused at vacuum levels of up to -1.0 Bar.
Key features of CRESTAPOL® 1260
The recommended cure system for Crestapol® 1260 is Cumene peroxide with Accelerator G (Cobalt Octoate 1%).
Post-cures of either 40°C for 16 hours, 80°C for 3 hours, or 80°C for 5 hours + 120°C for 3 hours are recommended to achieve maximum properties.
Typical gel time for 100 g at 25 ºC: 33-37 min
Heat Deflection Temperature (HDT) 109 ºC
It has been specially designed for the manufacture of carbon parts in closed mould, but can be also used for hand lay-up applications, taking into account that some sagging could be suffered. To avoid it you can add some thixotropic agent to the resin prior application.
The 1kg and 5k cans are supplied accelerated. If the customer wishes, the 25kg drums can be supplied without accelerating.
Crestapol 1260 Urethane Acrylate Resin x 1 kg, supplied with 20 g of Trigonox 239 catalyst
Crestapol 1260 Urethane Acrylate Resin x 5 kg, supplied with 100 g of Trigonox 239 catalyst
Crestapol 1260 Urethane Acrylate Resin x 25 kg, supplied with 0.5 kg of Trigonox 239 catalyst
Crestapol 1260 Urethane Acrylate Resin x 200 kg, supplied with 5 kg of Trigonox 239 catalyst
You might also like
The Benefits of Carbon-Kevlar Lightweight and Crestapol 1250LV in Rally Cars
