By buying this product you can collect up to 3 points. Your cart will total 3 points that can be converted into a voucher of €0.30.
RESOLTECH 1070 is a hand lay-up epoxy laminating system formulated to produce clear laminates and high gloss coatings with good UV stability and good mechanical properties while retaining some flex for improved fatigue performance such as for surfboards.
Very fast hardening in film.
RESOLTECH 1070 is a hand lay-up epoxy laminating system formulated to produce clear laminates and high gloss coatings with good UV stability and good mechanical properties while retaining some flex for improved fatigue performance such as for surfboards.
Very fast hardening in film used as final top coat.
The Resoltech 1070/1077 epoxy system is formulated for professionals who manufacture surf, wind-surfs, kite-boards, or any composites parts with high-end finish aspects requirements — and that need a very fast hardening system, closer to polyester curing speeds for improved productivity. The wetting out properties of this system and air release are acclaimed for and it has little if any sensitivity to blush unlike other surfboard resin systems that need extra additives for an equal performance or for improved sandability.
The resulting laminates will be absolutely clear on carbon fibre and even transparent if applied on special glass fabrics such as our silionne glass fbrics. The viscosity is adapted for squeegee, or brush application, and provides a perfect bubble free surface due to its surface tension properties.
The system has been formulated in order to leave virtually no free amines on the laminate. This enables the use of any quality polyester finish coat for quick sanding on top of the laminate without inhibition of the polyester. Resoltech 1070/1077 will cure at room temperature and obtain 90% of its mechanical properties after 5 days at room temperature. Post curing will elevate the final TG like any other epoxy system. The UV stability of Resoltech 1070 is the highest on the market according to comparative testing according to norm UNE EN 927-6 (700 hours of exposition).
Available with 2 hardeners : 1074 (3 hours of gel time) and 1077 (20 minutes).
High Tg of 70 °C with hardener 1074 and a maximum of 50 ºC with 1077.
Mixing ratio :
100: 40 weight for 1074
100: 45 weight for 1077
Epoxy resin Resoltech 1070/1074 slow x (1 + 0.4) kg. Gel time of 3 hours to 100 g of mixture at 23 °C
Epoxy resin Resoltech 1070/1074 slow x (5 + 2) kg.Gel time of 3 hours to 100 g of mixture at 23 °C
Epoxy resin Resoltech 1070/1074 slow x (25 + 10) kg. Gel time of 3 hours to 100 g of mixture at 23 °C
Epoxy resin Resoltech 1070/1077 fast x (0.4+0.18) kg. Gel time of 20 minutes 70 g of mixture at 23 °C
Epoxy resin Resoltech 1070/1077 fast x (1 + 0.45) kg. Gel time of 20 minutes 70 g of mixture at 23 °C
Epoxy resin Resoltech 1070/1077 fast x ( 5 + 2.25) kg. Gel time of 20 minutes 70 g of mixture at 23 °C
Epoxy resin Resoltech 1070/1077 fast x (25 + 11.25) kg. Gel time of 20 minutes 70g of mixture at 23 °C
Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.
* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.
____________________________________________________
PRODUCT
Polyvinyl and Isopropyl alcohol ................................................ 1 L
Ethylmethylketone / Methyl ethyl ketone ................................... 1 L
Acetone .................................................................................... 1 L
Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml
Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L
Resins, Top Coats and Gel Coats ................................................ 5 L
Paints ......................................................................................... 5 L
Styrene and MW Paraffin Solution .............................................. 5 L
_____________________________________________________________
If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.
In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.
* Shippings to Portugal will be always carried by Torrestir
Cookie preferences
