Tax incl. Tax excl.
Epoxi Resin Resoltech 1050

Resoltech 1050 Infusion Epoxy Resin

WRE1056-1.35
9 Items
€29.75

By buying this product you can collect up to 2 points. Your cart will total 2 points that can be converted into a voucher of €0.20.

€29.75 Tax incl. €29.75 Tax excl.

The 1050 epoxy laminating system is formulated to manufacture high performance lightweight structures with glass, carbon, aramid and basalt reinforcements with or without post-curing.

This epoxy system is also suitable for the manufacture of small to very large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding.

Supply

 Calculate Shipping Cost
Shipping:
0
to España via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

The 1050 epoxy laminating system is formulated to manufacture high performance lightweight structures with glass, carbon, aramid and basalt reinforcements with or without post-curing.

This latest generation system, without CMR substances according to GHS criteria is optimized with a low exotherm, low viscosity and excellent air release properties. This epoxy system is also suitable for the manufacture of small to very large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users.

All hardeners mix with a 100/35 ratio and can be pre-blended together to precisely adjust the desired pot life. The 1050 resin + 1053S system is particularly recommended for infusion thanks to its low mixed viscosity (205 mPa.s).

Mixing ratio by weight: 100/35

Maximum Tg: 78 °C

To achieve semi flexible parts it´s possible to combine RESOLTECH 1050 and RESOLTECH 1600. More info here.

Type of supply

Resoltech 1050/1059S infusion epoxy resin x (1 + 0.35) kg, gel time of 10 minutes for 70 g at 23 °C 

Resoltech 1050/1059S infusion epoxy resin x (5 + 1.75) kg, gel time of 10 minutes for 70 g at 23 °C 

Resoltech 1050/1059S infusion epoxy resin x (25 + 8.75) kg, gel time of 10 minutes for 70g at 23 °C

Resoltech 1050/1058S infusion epoxy resin x (1 + 0.35) kg, gel time of 26 minutes for 70 g at 23 °C

Resoltech 1050/1058S infusion epoxy resin x (5 + 1.75) kg, gel time of 26 minutes for 70 g at 23 °C

Resoltech 1050/1058S infusion epoxy resin x (25 + 8.75) kg, gel time of 26 minutes for 70 g  at 23 °C

Resoltech 1050/1056S infusion epoxy resin x (1 + 0.35) kg, gel time of 58 min for 70 g at 23 °C

Resoltech 1050/1056S infusion epoxy resin x (5 + 1.75) kg, gel time of 58 min for 70 g at 23 °C

Resoltech 1050/1056S infusion epoxy resin x (25 + 8.75) kg, gel time of 58 min for 70 g at 23 °C

Resoltech 1050/1055S infusion epoxy resin x (1 + 0.35) kg, gel time of 2 h 38 min for 70 g at 23 °C

Resoltech 1050/1055S infusion epoxy resin x (5 + 1.75) kg, gel time of 2 h and 38 min for 70 g at 23 °C

Resoltech 1050/1055S infusion epoxy resin x (25 + 8.75) kg, gel time of 2 h and 38 min for 70 g at 23 °C

Resoltech 1050/1053S infusion epoxy resin x (1 + 0.35) kg, gel time of 14 hours for 70 g at 23 °C

Resoltech epoxy resin 1050/1053S x (5 + 1.75) kg, gel time of 14 hours for 70 g at 23 °C

Resoltech 1050/1053S infusion epoxy resin x (25 + 8.75) kg, gel time of 14 hours for 70 g at 23 °C

9 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

Download Technical Data Sheet             

                              

Resoltech 1050                        

                      

Download Safety Data Sheet                

                                              

Resoltech 1050 

Resoltech 1054 

Resoltech 1055 

Resoltech 1056 

Resoltech 1058 

Resoltech 1059 

Customers who bought this product also bought:

Product added to wishlist