Tax incl. Tax excl.
Resolcoat 4000/4005 transparent epoxy resin
Resolcoat 4000/4005 transparent epoxy resin
Resolcoat 4000/4005 transparent epoxy resin
Resolcoat 4000/4005 transparent epoxy resin

Resolcoat 4000/4005 Clear Epoxy Coating Resin

WRE4005-1.38
0 Item
Out-of-Stock
€46.82

By buying this product you can collect up to 4 points. Your cart will total 4 points that can be converted into a voucher of €0.40.

€46.82 Tax incl. €38.69 Tax excl.
Tax included

RESOLCOAT 4000 CLEAR / 4005 is a clear epoxy coating system formulated to produce high gloss coatings with the best possible UV stability for an epoxy system with all the high mechanical characteristics epoxies offer compared to other coatings. Maximum layer thickness recommended: 1 mm.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 5.0 / 5) - 2 feedback(s)

RESOLCOAT 4000 CLEAR / 4005 is a clear epoxy coating system formulated to produce high gloss coatings with the best possible UV stability for an epoxy system with all the high mechanical characteristics epoxies offer compared to other coatings. 

Maximum layer thickness recommended: 1 mm.

The system is formulated for the coating of all type of surfaces with high end finish aspects requirements for inside or outside exposure such as surfboards, art pieces, outdoor furniture...etc...

One only coat should be necessary as the film is thick enough.

Should a second coat be applied, sanding is required between coats unless the second coat is

applied within the first coat curing time.

On wood or other porous materials, it is recommended to work in descending temperatures so air does not release while the 4000 CLEAR / 4005 is curing.

To avoid air release & entrapment while curing on porous materials, layer of RESOLCOAT 1010/1014 water based epoxy primer may be used.

The mixing ratio by weight of the resin 4000 RESOLCOAT with its hardener 4005 is 100: 38 parts.

Gel time 70 ml at 23 ° C: 26 min
Gel time 2mm film at 23 ° C: 2 hours 30 min

Type of supply

RESOLCOAT 4000/4005 Clear Epoxy Coating Resin x 1.38 kg

RESOLCOAT 4000/4005 Clear Epoxy Coating Resinx 6.90 kg

RESOLCOAT 4000/4005 Clear Epoxy Coating Resin x 34.50 kg

Heat resistance
Between 50 and 75ºC
Processing time
Up to 30 min
UV resistance
Yes
Colour
Colourless transparent
Flexible
No

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

Customers who bought this product also bought:

Ratings and comments from our customers

Score:  
 
 -   (Algeciras, Spain)
Acabados en madera excepcionales, como capa de acabado.
Score:  
 
 -   (SANLUCAR DE BARRAMEDA, Spain)
Una de las mejores resinas para terminacion carbono visto que he probado. Según soporte se necesita de una imprimacion (PA47) en mi caso sobre carbono y entre capas un matizado con lija 120/150
Product added to wishlist