Tax incl. Tax excl.
Recapoli 953 TPA POLYESTER RESIN

Recapoli 953 TPA Hand Lay-up Orthophthalic Thixotropic Preaccelerated Polyester Resin

WRP0953-1
4 Items
€9.50

No reward points for this product.

€9.50 Tax incl. €7.85 Tax excl.
Tax included

RECAPOLI 953TPA is an unsaturated polyester based on standard acids and glycols dissolved in styrene. It has a medium reactivity, a medium viscosity, and contains thixotropic agents and can be cured with conventional curing agents. It is suitable for the production of standard quality glass-fibre reinforced parts with the hand lay-up/spray-up process.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 5.0 / 5) - 5 feedback(s)

RECAPOLI 953TPA is an unsaturated polyester based on standard acids and glycols dissolved in styrene. It has a medium reactivity, a medium viscosity, and contains thixotropic agents and can be cured with conventional curing agents.

Approvals: Cured unreinforced Recapoli 953TPA conforms to type 1120 according to DIN 16946/2, is classified in group 0 according to DIN 18820/1 and in group 1A according EN ISO 13121/1.

Remarks:
- Viscosity measurement V227.05: Brookfield LVT #3, 25°C
- Reactivity measurement G116.01: 100g of resin + 1.25g Butanox M50 (Azko Nobel) or Luperox K1S (Arkema), 25°C

Applications

RECAPOLI 953TPA is suitable for the production of standard quality glass-fibre reinforced parts with the hand lay-up/spray-up process. The resin has good wetting properties, resistance against sagging on vertical surfaces, and contains a colour change peroxide-indicator.

Working instructions


Guidelines before use: The resin Recapoli 953TPA should be conditioned at a well-defined application dependent temperature (usually 15°C minimum for a MEKP/Co cure). Stir the resin well before.

Processing: It normally exhibits tack-free cure. However, the surface may not be cured completely. To ensure tack-free cure of surfaces exposed to air, suitable additives (paraffin solution) should be added. The final state of cure may be optimized by post curing at elevated temperature (80°C) for several hours.

Curing conditions: Cured for 24h at room temperature and post-cured 5h at 100°C according to TM X-12Ab.

Storage

The resin should be stored indoors, in the original, unopened and undamaged packaging, in a dry place.

- Storage temperature: min. +5°C, max. 30°C

- Shelf life: Shelf life is reduced at higher temperatures and the properties of the resin might change during storage. The shelf life of styrene containing unsaturated polyesters will be significantly reduced when exposed to light. Store in dark and in 100% light tight containers only.

- Working safety instructions: see relevant material safety data sheets.

Type of supply

Recapoli 953 TPA Hand Lay-up Ortho Thixo Preaccelerated Polyester Resin x 1 kg, supplied with 20 g of MEKP catalyst

Recapoli 953 TPA Hand Lay-up Ortho Thixo Preaccelerated Polyester Resin x 5 kg, supplied with 100 g of MEKP catalyst

Recapoli 953 TPA Hand Lay-up Ortho Thixo Preaccelerated Polyester Resin x 25 kg, supplied with 0.5 kg of MEKP catalyst

Recapoli 953 TPA Hand Lay-up Ortho Thixo Preaccelerated Polyester Resin x 220 kg, supplied with 5 kg of MEKP catalyst

UV resistance
No
Colour
Grey
Flexible
No
Type
ORTHO
Tixo
Yes
Low shrinkage
No
Fire retardant
No
Low styrene emission
No
Lloyd´s Register or Norske Veritas
No
Food contact
No
4 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

Customers who bought this product also bought:

Ratings and comments from our customers

Score:  
 
 -   (Molina de Aragon, Spain)
No comments
Score:  
 
 -   (São João das Lampas, Portugal)
Mui bueno servicio, rápido. Bom producto. Gracias
Score:  
 
 -   (São João das Lampas, Portugal)
Mui bueno servicio, rápido. Bom producto. Gracias
Score:  
 
 -   (Boqueixón, Spain)
No comments
Score:  
 
 -   (Hondarribia, Spain)
No comments
Product added to wishlist