Tax incl. Tax excl.
Crystic U1155PAECC Low Styrene Content Polyester Resin

Crystic U1155PAECC Low Styrene Content Polyester Resin

WRP1155-1
0 Item
Product available with different options
€11.51

By buying this product you can collect up to 1 point. Your cart will total 1 point that can be converted into a voucher of €0.10.

€11.51 Tax incl. €9.51 Tax excl.
Tax included

CRYSTIC U1155PAECC is a thixotropic, pre-accelerated, orthophtalic unsaturated polyester resin with a low viscosity and a good reactivity. The resin features a low styrene content. The product contains a colour change system that reacts when the catalyst is added.

Gel time: at 25°C of 100 g of resin with 2 ml of Catalyst M is 14 – 16 mins. Heat Distortion Temperature (HDT): 70 ºC.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 5.0 / 5) - 1 feedback(s)

CRYSTIC U1155PAECC is a thixotropic, pre-accelerated, orthophtalic unsaturated polyester resin with a low viscosity and a good reactivity. The resin features a low styrene content which is combined with a low styrene emission system. During the spray up phase, styrene emissions from Crystic U1155PAECC are considerably reduced compared to normal spray applied resins. The product contains a colour change system that reacts when the catalyst is added.  

CRYSTIC U1155PAECC should be allowed to attain workshop temperature (18 – 23°C) before use. It needs only the addition of the catalyst to start its curing reaction. The colour change mechanism will drive the resin to change from blue to green then to yellow/brownish colour. The resin is suitable for general purpose applications such as transport, building and industrial parts.  


Features and Benefits Features    

  • Benefits Low styrene content / emission: Better comfort for the workers and for the neighbourhood
  • Colour change: Safety factor to control the addition of catalyst
  • Low viscosity: Rapid wet out of the reinforcement
  • Good reactivity: Fast mould turn round  

Formulation

The following cold curing formulation is recommended:

CRYSTIC U1155PAECC: 100 parts Catalyst M : 1 to 2 parts

Catalyst M is a Méthyl Ethyl Kétone Peroxyde at 50% such as the Butanox M 50 from AKZO or Luperox K1S from Arkema.
The ambient temperature, the quantity and the type of catalyst will control the gel time of the resin. The gel time at 25°C of 100 g of resin with 2 ml of Catalyst M is 14 – 16 mins. Curing should not be carried out at temperature below 15°C.  

Additives 

Since certain pigments, fillers or extra styrene may the affect properties of CRYSTIC U1155PAECC their effect should be evaluated before addition to the formulation.

Post-Curing

For most applications satisfactory result will be obtained by curing at room temperature (20°C). Some improvement in properties may be obtained by post-curing 16 hours at 40°C after release from the mould.

Heat Distortion Temperature (HDT): 70 ºC

Type of Suply

Crystic U1155PAECC x 1 kg, supplied with 20 g de MEKP

Crystic U1155PAECC x 5 kg, supplied with 100 g de MEKP

Crystic U1155PAECC x 25 kg, supplied with 0,5 kg de MEKP

Crystic U1155PAECC x 225 kg, supplied with 5 kg de MEKP

UV resistance
No
Colour
Bluish
Flexible
No
Type
ORTHO
Tixo
Yes
Low shrinkage
No
Fire retardant
No
Low styrene emission
Yes
Lloyd´s Register or Norske Veritas
No
Food contact
No
0 Item

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir

Customers who bought this product also bought:

Ratings and comments from our customers

Score:  
 
 -   (Madrid , Spain)
Me asesoraron para encontrar el producto que mejor se adaptaba al uso que iba a darle y me ha dado muy buen resultado. El envío llegó muy rápido. Todo perfecto
Product added to wishlist