Resoltech 1500 Infusion Structural Epoxy Resin for Tooling & Parts

Reference RE1504-1.3

In stock 0 Item

Out-of-Stock

€48.28

By buying this product you can collect up to 4 points. Your cart will total 4 points that can be converted into a voucher of €0.40.

€48.28 Tax incl. €39.90 Tax excl.

Tax included

Resoltech 1500 / 1504 is an epoxy infusion system with an extremely low viscosity that enables structural composite parts& tools manufacturing with glass of carbon fibre. The system is compatible with RESOLTECH ́s range of 140°C tooling gelcoat, laminating and repair systems.

Supply

Notify me when available

Notify me

Calculate Shipping Cost

Shipping: 0

to Spain via

Estimated delivery: No estimated delivery specified day(s)

Ratings and comments from our customers

( 0.0 / 5) - 0 feedback(s)

Thermally stable up to 140°C (284°F) when fully post cured
Resistant to thermal cycling damage
Low initial mixed viscosity for easier infusion; 250 cP at 23°C (73.4°F)
Long pot-life and gel time; capable of infusing large or complex moulds
Ambient curing and low shrinkage for accurate mould manufacture

Resoltech 1500 / 1504 is an epoxy infusion system with an extremely low viscosity that enables structural composite parts& tools manufacturing with glass of carbon fibre.

The system is compatible with RESOLTECH ́s range of 140°C tooling gelcoat, laminating and repair systems.

Resoltech 1500 / 1504 is a low shrinkage ambient curing system, which provides a simple way to produce high accuracy moulds.

Thanks to its low viscosity and its exceptional wetting ability this system is designed for infusion and cures at ambient temperatures, it should then be mid-cured at 60°C (140°F) for 8 hours to guarantee the strength needed for demoulding.

It can then be post cured off the plug to give a material that is thermally stable up to 140°C (284°F).

Like all RESOLTECH systems,1500 / 1504 is a state of the art chemistry epoxy system, formulated without any CMR components and caring about the H&S working conditions

Mixing Ratio by weight: 100 g of Resin 1500 : 30 g of Hardener 1504

The mixing ratio must be respected neither excess nor default.

The mixture should be thoroughly stirred to ensure full homogeneity.

Physical Characteristics

Visual aspect

1500: Opalescent slightly yellow liquid

1504: Colourless limpid liquid

Mix: Colourless to slightly yellow opalescent liquid

Density at 23°C (ISO 1675, ±0.05)

References

1500

1504

Density

1.11

0.92

Mixture density

1.07

Viscosity at 23°C(ISO 12058.2, ±15%)

References

1500

1504

Viscosity (mPa.s)

1500

Mixture viscosity (mPa.s)

250

Reactivity

System	1500/1504
Reactivity on 70mL (~4cm thickness) at 23°C	6h30min
Time at exothermic peak on 70mL	6h20min
Temperature at exothermic peak on 70mL	43°C
Reactivity on 500mL at 23°C	3h10min
Reactivity in 2mm film at 23°C	7h40min

Curing & Post-curing

System	1500/1504
Curing cycles	8h60°C	8h60°C	3h50°C+3h100°C+3h150°C
Tg	81°C	85°C	141°C
Shore D Hardeness	90	91	94

System

1500/1504

Curing cycles

2h120°C

(0.2°C.min-1)

2h130°C

(0.2°C.min-1)

124°C

131°C

Mechanical Properties

System	1500/1504
Curing cycles	8h60°C	3h50°C+3h100°C+3h150°C
Flexural Modulus	3.33 GPa	3.23 GPa
Flexural max. strength	86.3 MPa	149.3 MPa
Elongation at max. strength	2.5 %	7.5 %

Type of supply

Resoltech 1500 / 1504 epoxy infusion system x 1.3 kg : (1+0.3) kg

Resoltech 1500 / 1504 epoxy infusion system x 6.5 kg : (5+1.5) kg

Resoltech 1500 / 1504 epoxy infusion systemx 32.5 kg : (25+7.5) kg

Resoltech 1500 / 1504 epoxy infusion system x 260 kg : (200+2x30) kg

Heat resistance: Between 120 and 150ºC
Processing time: Above 2 hours
UV resistance: No
Colour: Slightly yellowish
Flexible: No

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as SCHENKER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR and Envialia.

____________________________________________________

PRODUCT

Polyvinyl and Isopropyl alcohol ................................................ 1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone .................................................................................... 1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Schenker.

* Shippings to Portugal will be always carried by Torrestir