loading spinner
Crystic 15PA Vinyl Ester spray Tooling Gel Coat View larger

Ratings and comments from our customers
( 5.0 / 5) - 1 feedback(s)

New product

49 items in stock

Crystic 15PA High Performance Vinyl Ester Spray Tooling Gelcoat

22,43 €

Calculate Delivery Cost

By buying this product you can collect up to 30 loyalty points. Your cart will total 30 points that can be converted into a voucher of 3,00 €.


Crystic Gelcoat 15PA(S) is designed for use in the manufacture of high quality, FRP composite tooling. It is a pre-accelerated Spray gelcoat specially formulated from a vinyl ester base resin and is available in a restricted range of colours. The information contained in this leaflet also applies to pigmented versions.

Crystic Gelcoat 15PA(S) is heat resistant with high impact strength and good resistance to chemical attack. It is extremely resilient and can be polished to a high gloss.

Crystic Gelcoat 15PA(S) is a tooling gelcoat and the application should be controlled at 0.4 - 0.6 mm wet film thickness As a guide, approximately 500 - 750 gm-2 of gelcoat (depending on pigment) will give the required thickness when evenly applied. If left for prolonged periods, Crystic Gelcoat 15PA(S) will cure to an almost tack-free finish, but this has no adverse effect on the adhesion of the backing laminate.

Crystic Gelcoat 15PA(S) requires only the addition of catalyst to start the curing reaction. The recommended catalyst is Luperox K1S (X-8 Catalyst) or Butanox M50 which should be added at 2% into the gelcoat. (Please consult our Technical Service Department if other catalysts are to be used). 

Range of colors : green 2432 or black 630.

Gel time: between 7 and 12 minutes at 18-20 °C with 2% MEKP catalyst.

Deflection Temperature under load† (1.80 MPa): 106 ºC.

Type of supply

Crystic 15PA green Spray Vinyl Ester Tooling Gelcoat x 1 kg, supplied with 20 g of MEKP catalyst

Crystic 15PA green Spray Vinyl Ester Tooling Gelcoat x 5 kg, supplied with 100 g of MEKP catalyst

Crystic 15PA green Spray Vinyl Ester Tooling Gelcoat x 25 kg, supplied with 0.5 kg of of MEKP catalyst

Crystic 15PA black Spray Vinyl Ester Tooling Gelcoat x 1 kg, supplied with 20 g of of MEKP catalyst

Crystic 15PA black Spray Vinyl Ester Tooling Gelcoat x 5 kg, supplied with 100 g of MEKP catalyst

Crystic 15PA black Spray Vinyl Ester Tooling Gelcoat x 25 kg, supplied with 0.5 kg of MEKP catalyst

Ask a Question

Customers who bought this product also bought:

30 other products in the same category:

Ratings and comments from our customers

Score:  
 
 -  
No comments
Average rating for our customers
4.9 ( On 5 )
More feedbacks...

Gel Coats / Top Coats

Specials

Create quotation from my cart Request a quote