loading spinner
Resina Epoxy Resoltech 1450ALU View larger

Ratings and comments from our customers
( 3.0 / 5) - 1 feedback(s)

New product

7 items in stock

Resoltech 1450ALU 25 Aluminium filled Casting Epoxy Resin

56,70 €

Calculate Delivery Cost

By buying this product you can collect up to 82 loyalty points. Your cart will total 82 points that can be converted into a voucher of 8,20 €.

RESOLCOAT 1450T ALU25 is an aluminium filled epoxy casting system formulated to produce parts or moulds from a few mm to several cm thick. It is used to produce moulds and tooling plugs. RESOLCOAT 1450T ALU25 combines ease of use, high thermal and mechanical properties as well as virtually no shrinkage.

RESOLCOAT 1450T ALU25 offers a good chemical resistance and its high TG makes it an ideal product for phenolic resins parts production, thermoforming or any other high TG application were the mould will be subject to thermal shocks.

It usually used for casting, but may also be used for laminating glass reinforcements and powdered mats

It’s good thermal conductivity makes the 1450 ALU25 a choice system for heated moulds.

TG of 150°C enables the realisation of high quality and performance parts as well as tooling for pre-preg parts.

Mixing ratio by weight = 100:13, with hardener 1452 Resoltech

Gel time for 100 g of mixture at 25 °C: 280 min

Type of supply

Resoltech 1450ALU/1452 Aluminium filled Casting Epoxy Resin x 1.13 kg

Resoltech 1450ALU/1452 Aluminium filled Casting Epoxy Resin x 5.65 kg

Resoltech 1450ALU/1452 Aluminium filled Casting Epoxy Resin x 33.9 kg

Ask a Question

Customers who bought this product also bought:

30 other products in the same category:

Ratings and comments from our customers

Copia bastante bien los detalles del molde, y nos permite gran margen de trabajo para desairearla y/o verterla poco a poco en molde antes de que endurezca, por contra por lo menos por el uso que yo hago ( sin post curado ), queda quebradiza en las piezas mas pequñas, probare a añadirla fibra molida

Estimado Pablo, muchas gracias por su opinión. Cuanto más pequeña sea la pieza, es clave seguir al pie de la letra lo que dice la ficha técnica. 24h a temperatura ambiente de (20-25°C) + 4h a 80°C + 6h a 160°C. Mínimo curado para desmoldeo : 12H a 60ºC Se pueden postcurar a menores temperaturas durante más tiempo: 10H a 120 ºC aportará una Tg de 50 ºC. Si no se realizan estos postcurados, sobre todo en piezas pequeñas, difícilmente se podrán obtener excelentes propiedades. Un cordial saludo.

Average rating for our customers
4.9 ( On 5 )
More feedbacks...



Create quotation from my cart Request a quote