loading spinner
Resolcoat 4000/4005 transparent epoxy resin View larger

Ratings and comments from our customers
( 5.0 / 5) - 2 feedback(s)

This product is no longer in stock

New product

Notify me when available

Resolcoat 4000/4005 Clear Epoxy Coating Resin

38,69 €

Calculate Delivery Cost

By buying this product you can collect up to 61 loyalty points. Your cart will total 61 points that can be converted into a voucher of 6,10 €.


RESOLCOAT 4000 CLEAR / 4005 is a clear epoxy coating system formulated to produce high gloss coatings with the best possible UV stability for an epoxy system with all the high mechanical characteristics epoxies offer compared to other coatings. 

Maximum layer thickness recommended: 1 mm.

The system is formulated for the coating of all type of surfaces with high end finish aspects requirements for inside or outside exposure such as surfboards, art pieces, outdoor furniture...etc...

One only coat should be necessary as the film is thick enough.

Should a second coat be applied, sanding is required between coats unless the second coat is

applied within the first coat curing time.

On wood or other porous materials, it is recommended to work in descending temperatures so air does not release while the 4000 CLEAR / 4005 is curing.

To avoid air release & entrapment while curing on porous materials, layer of RESOLCOAT 1010/1014 water based epoxy primer may be used.

The mixing ratio by weight of the resin 4000 RESOLCOAT with its hardener 4005 is 100: 38 parts.

Gel time 70 ml at 23 ° C: 26 min
Gel time 2mm film at 23 ° C: 2 hours 30 min

Type of supply

RESOLCOAT 4000/4005 Clear Epoxy Coating Resin x 1.38 kg

RESOLCOAT 4000/4005 Clear Epoxy Coating Resinx 6.90 kg

RESOLCOAT 4000/4005 Clear Epoxy Coating Resin x 34.50 kg

Ask a Question

Customers who bought this product also bought:

30 other products in the same category:

Ratings and comments from our customers

Score:  
 
 -  
Acabados en madera excepcionales, como capa de acabado.
Score:  
 
 -  
Una de las mejores resinas para terminacion carbono visto que he probado. Según soporte se necesita de una imprimacion (PA47) en mi caso sobre carbono y entre capas un matizado con lija 120/150
Average rating for our customers
4.9 ( On 5 )
More feedbacks...

Resins

Specials

Create quotation from my cart Request a quote