Tax incl. Tax excl.
Carbo Spray putty polyester-gewehr-teile, carbon

Carbo Spray Putty Polyester-pistole für die schlichtbearbeitung von werkstücken aus kohlenstoff

CARBOSPRAYDIS
0 Artikel
Artikel nur noch in anderer Variante erhältlich
63,48 €
76,81 € Tax incl. 63,48 € Tax excl.
zzgl. MwSt.

Beim Kauf dieses Artikels sammeln Sie 7 Punkt, Punkte,. Ihre heutige Bestellung umfasst dann 7 Punkte, welche in einen Gutschein mit folgendem Wert umgewandelt werden können: 0,70 €.

Polyesterspachtel anwendbar pistole für die reparatur von carbonteilen eingelöst werden, die poren der oberfläche.

Wählen Sie die Art der Lieferung

Bewertungen und Kommentare unserer Kunden
( 0.0 / 5) - 0 Feedback (s)

DESCRIPTION

Transparent polyester putty for carbon parts.

It can be applied with a spatula or a spray gun.

 
FEATURES

          Adhesion on carbon laminates (On epoxy carry out a previous test, since each resin is different).
          Adhesion on polyester putty.
          Adhesion on GRP pieces.
          For filling small pores or small imperfections.
          Fast hardening.
          Non-porous surface.
          Transparent.
          UV resistance - no yellowing.

 
APP

To fill uneven surfaces (pores, sanding marks, and cavities).

 
DATA

VOC content: 2004/42 / IIB (b) (250): <250 g / l

Color: transparent pinkish but once catalyzed and applied it is colorless.

 
USE

Surface: The surface must be clean, dry and free of grease for optimal adhesion.

Do not use Carbo Spray on the following surfaces: Wash Primer, Epoxy Primer, Epoxy Putties. This could cause a chemical reaction and the base could soften again.

Final finish: it is recommended to apply a varnish on the Carbo Spray.

Product preparation:

Add 2 - 2.5% by weight PMEC catalyst.

The components must be mixed perfectly, otherwise there may be increased sensitivity to moisture.

Diluent: In order to apply the putty by spray, the diluent ref. 148,234. Between 5% and 20%.

Application: Gravity gun, 2.5 mm Ø nozzle, at a working pressure of 2-3 bar.

Cleaning: The gun must be cleaned with acetone or the solvent itself directly after use, that is, within the product's hardening time.

Pot life of mix: At a room temperature of 18 ° C - 20 ° C: 20 minutes.

  Drying:

Room Temperature : 20° C

60 - 120 min

 

Room Temperature: 40° C

60 min

 

Room Temperature: 60° C

30 min

 

Room Temperature: 80° C

15 min



Before exposure to heat, respect a solvent evaporation time of 15 minutes!

SANDING

After the specified drying time.

Pre-sanded: dry - with P 240 - P 360

Re-sanding: dry - with P 400 - P 600

Due to its high sensitivity to water, Carbon Spray must be sanded dry.

In case of wet sanding the water must be completely evaporated.

 

Repainted:

You can use the following CAR SYSTEM products, after applying Carbo Spray:

2K Epoxy High Speed ​​Primer, 2K Filler VOC 540, 2K Carbo Clear, Vario Fuller, Wet on Wet Filler, 1 K Filler.

An acrylic or polyurethane varnish.

 

Storage:

Approx. 6 months at 18 ° C in the original container.

Supply type


Polyester putty Carbo Spray x 1 liter (without solvent)

Polyester putty Carbo Spray x 1 liter + 1 liter of solvent

0 Artikel

Kunden, die diesen Artikel gekauft haben, kauften auch:

Produkt zur Wunschliste hinzugefügt