Tax incl. Tax excl.

Wind Blades Repair

In this section we offer composite patches & fillers and putties for refurbishing operations on composites, metals, plastics and wood.

In this section we offer a high quality range of polyurethane, polyester and epoxy putties and fillers.

PA80 83 g/m2 Taffeta Weave Peel Ply , 0,5 m wide

MPA80BA0500
"PA80" of 83 g/m2 is a taffeta weave polyamide peel ply with standard quality. Peel plies are used to impart a textured surface to the moulded component to improve adhesion in secondary bonding or painting.
€3.60 €4.36 Tax incl. €3.60 Tax excl.

LDPE Infusion Pipe Ø 10 x 12 mm

PEBD10-12
Low density polyethylene pipe for all kind of thermosetting resins used for resin distribution in infusion and vacuum bagging processes. Maximum service temperature: 90 ºC.
€3.95 €4.78 Tax incl. €3.95 Tax excl.

150 gsm Non Woven Breather Felt Zetafelt F 3553, width 152 cm

F3553/150
Non woven breather felt made of polyester fibres. Recommended for moulding of elaborate composite parts. Suitable for eliminating any excess of resin from vacuum bagged laminates and ease the debulk process of the laminates, both during wet hand lay-up and prepreg lamination processes.
€3.95 €4.78 Tax incl. €3.95 Tax excl.

PA80 83 g/m2 Taffeta Weave Peel Ply, 1.25 m wide

WMPA80/1360
"PA80" of 83 g/m2 is a taffeta weave polyamide peel ply with standard quality. Peel plies are used to impart a textured surface to the moulded component to improve adhesion in secondary bonding or painting.
€6.00 €7.26 Tax incl. €6.00 Tax excl.

PA64 64 gsm Plain Weave Peel Ply, 200 mm wide

PEELPLY64/200
PA64 Peel ply fabric 100% polyamide with high thermal resistance (190 ºC) to adapt on laminates made with thermosetting resins (epoxy and polyester) and reinforcing fibers in order to obtain rough cured surfaces, once separated of the hardened laminate. Roll width: 200mm Weight: 64 g/m2
€6.60 €7.99 Tax incl. €6.60 Tax excl.

DIADRAIN 50 mm Flat Infusion Resin or Vacuum Channel 50 mm

WDIADRAIN50
DIADRAIN is a flat resin or vacuum channel. It consists of a three-dimensional polyester filament core structure wrapped in a non woven polyester sleeve. DIADRAIN is flexible, easy to cut to size and function as resin supply channel or vacuum channel in vacuum infusion process.
€6.96 €8.42 Tax incl. €6.96 Tax excl.

LDPE Infusion Pipe Ø 14 x 16 mm

PEBD14-16
Low density polyethylene pipe for all kind of thermosetting resins used for resin distribution in infusion and vacuum bagging processes. Maximum service temperature: 75 ºC.
€7.20 €8.71 Tax incl. €7.20 Tax excl.

800 gsm (+45°/-45°) Biaxial Glass Fabric, 127 cm

WTVBX800
Biaxial glass fabric of 800 /m2 built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.
€7.65 €9.26 Tax incl. €7.65 Tax excl.

610 g/m2 Biaxial Stitched Glass Fabric (+45°/-45°), S-TEX X-E -1270 mm wide

TVBX610
Biaxial glass fabric built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy. Widely used for processes where a very good mechanical strength combined with...
€7.90 €9.56 Tax incl. €7.90 Tax excl.

800 g/m2 Biaxial Stitched Glass Fabric (0°/90°), 127 cm

LT800-0/90
Biaxial glass fabric of 800 /m2 built of two layers of unidirectional fabric oriented at 0º and 90º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.
€7.95 €9.62 Tax incl. €7.95 Tax excl.

400 g/m2 Biaxial Stitched Glass Fabric (+45°/-45°), 127 cm wide

WTVBX400
Biaxial glass fabric of 400 g/m2 built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.
Product available with different options
€8.20 €9.92 Tax incl. €8.20 Tax excl.

450 g/m2 Biaxial Stitched Glass Fabric (+45°/-45°), 127 cm wide

WTVBX450
Biaxial glass fabric of 450 g/m2 built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.
€8.20 €9.92 Tax incl. €8.20 Tax excl.

600 g/m2 Biaxial Stitched Glass Fabric (0°/90°), 127 cm wide

WTBX600
Biaxial glass fabric built of two layers of unidirectional fabric oriented at 0º and 90º respectively. Extensively used for han lay-up, injection or infusion and RTM. Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.
€8.40 €10.16 Tax incl. €8.40 Tax excl.

ELA20 Perforated Release Film 25 microns

WFIELA20P3100
ELA20 is a polyethylene copolymer perforated release with P3 type holes. Used between the peel ply and the breather cloth during the vacuum bagging process. Allows the flow of air trapped and excess of resin in the laminates.
€8.40 €10.16 Tax incl. €8.40 Tax excl.

XM600/300 Combi Mat 600 g/m2 Biaxial E-Glass Fabric (+45°/-45°) / Mat 250 g/m2, 127 cm wide

XM600/250
Combi Mat Biaxial E-glass is ideal for laminates with polyester, vinyl ester and epoxy resins. Made with a 600 g/m2 biaxial glass fabric stitched to a 250 g/m2 emulsion chopped strand mat. Especially recommended as high performance structural reinforcement for large composite parts. Very used for the production of composite boats, windblades and any...
Out-of-Stock
€8.95 €10.83 Tax incl. €8.95 Tax excl.

600 g/m2 Biaxial Stitched Glass Fabric (+45°/-45°), 127 cm wide

WTVBX600
Biaxial glass fabric built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.
€9.68 €11.71 Tax incl. €9.68 Tax excl.

XM600/300 Combi Mat 600 g/m2 Biaxial E-Glass Fabric (+45°/-45°) / Mat 300 g/m2, 125 cm wide

XM600/300
Combi Mat Biaxial E-glass is ideal for laminates with polyester, vinyl ester and urethane-acrylate resins. Made with a 600 g/m2 biaxial glass fabric stitched to a 300 g/m2 emulsion chopped strand mat. Especially recommended as high performance structural reinforcement for large composite parts. Very used for the production of composite boats, windblades...
€10.10 €12.22 Tax incl. €10.10 Tax excl.

Crystic R115PA Hand Lay-UP Ortho Polyester Resin

WRP0115A
Crystic R115PA is a thixotropic, accelerated, orthophtalic general purpose unsaturated polyester resin. CRYSTIC R 115 PA can be used by hand lay up or by spray application for the production of most glass reinforced laminates.
€10.95 €13.25 Tax incl. €10.95 Tax excl.

Crystic 489PA35 Hand Lay-Up Isophthalic Polyester Resin

WRP0489PA35
Crystic 489PA35 is an isophthalic, thixotropic, and pre-accelerated unsaturated polyester resin. Ideal for the manufacture of laminates with reinforcing fibers in nautical applications and in shipbuilding. It is a formulation with gel time 33 to 37 min at 25ºC and with 2% PMEC catalyst. It has a Lloyd's Register of Shipping certificate.
Out-of-Stock
€12.00 €14.52 Tax incl. €12.00 Tax excl.

Crystic 489 PABTLV Hand Lay-Up Isophthalic Polyester Resin

WRP1489
Crystic 489 PABTLV is a thixotropic, isophthalic and pre-accelerated polyester resin. When used with Crystic Gelcoat 65PA, they produce a matched performance system for moulding boat hulls with outstanding durability and superior blister resistance. Crystic 489 PABTLV is approved by Lloyd’s Register of Shipping for use in the construction of craft under...
€12.00 €14.52 Tax incl. €12.00 Tax excl.

Sealant Tape LSM7000 (210 ºC)

WVC7000
Sealant tape for vacuum bag with heat resistance up to 210 °C.
Out-of-Stock
€12.70 €15.37 Tax incl. €12.70 Tax excl.

1199 g/m2 Triaxial Stitched Glass Fabric (0º/+45º/-45º), Saertex Y-E 1270 mm wide

TVTX1200
Triaxial glass fabric of 1199 g/m2 built of three layers of unidirectional fabric oriented at 0º, +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM. Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy.
€13.98 €16.91 Tax incl. €13.98 Tax excl.

813 gsm Biaxial Stitched Glass Fabric (+45°/-45°) Saertex® X-E-810, width 127 cm

TV813
813 gsm biaxial E-glass produced with two layers of unidirectional fabric oriented at +45º and -45º. Widely used for hand lay-up, injection (RTM and RTM light) and infusion (VARI).  Roll width: 1270 mm Stitched Glass Fabrics, also named Non-Crimp Fabrics, are ideally suited for selective reinforcement. Fibreglass is bundled and stitched together, rather...
Out-of-Stock
€14.35 €17.36 Tax incl. €14.35 Tax excl.
Product added to wishlist