Non Woven Cores

Nonwoven cores are materials made from polyester or fiberglass fabrics. Very elastic and conformable when impregnated with the resin. They can be used in different processes and with different types of thermosetting resins.

Showing 1-11 of 11 item(s)

SphereCel PrintBlock, Core for Infusion and RTM 1,3 mm

SPHERECEL-1.3

SphereCel PrintBlock is a non-woven core material which is used as a print-through protection media in closed molding applications.Manufactured by embedding thermoplastic microspheres into fibreglass fibres and microperforated. During the impregnation phase, the micro-perforations will close up, resulting in uniform layer, which absobs reinforcement...

€9.65 €11.68 Tax incl. €9.65 Tax excl.

View

SphereCel HX Type CM, Core for Infusion and RTM, 2 mm

SPHERECELHX-2

SphereCel HX 2 mm is a non-woven core material, compatible with all regular types of resins, including polyester, vinyl ester, phenolic and epoxi. It is the cost effective solution for closed mold processes, infusion, LRTM, RTM, compression molding.

€11.50 €13.92 Tax incl. €11.50 Tax excl.

View

Sphere.core SP 3 mm for Hand Lay-Up

WNU3000

Core material made of polyester tissue voluminised with thermoplastic microballoons. Easy to drape to curved surfaces is compatible with most of the thermosetting resins: polyester, vinyl ester, urethane-acrylate and epoxy.

€13.00 €15.73 Tax incl. €13.00 Tax excl.

View

Sphere.tex 2 mm for Hand Lay-Up, Vacuum Infusion and RTM

WNU2000

A fabric made of E-glass fibres which is volumised by embedding thermoplastic microspheres. Due to good drapeability, low resin absorption and high stability characteristics, while being lightweight at the same time, it is pre-eminently suitable for high-tech GRP products, also in combination with carbon and aramid fibres.

€15.00 €18.15 Tax incl. €15.00 Tax excl.

View

Soric TF 2 mm Cosmetic

WNC002TF

Lantor Soric SF is a general purpose non woven core material used when sandwich cosmetic laminates must be produced.

€19.00 €22.99 Tax incl. €19.00 Tax excl.

View

Sphere.core PSI 2 mm for Vaccum Infusion and RTM

SCOREPSI2

This core material with internal flow medium was developed to meet highest demands in RTM and VIP processes. It is characterized by excellent flow properties. The internal flow medium saves vacuum consumables and waste.

€22.00 €26.62 Tax incl. €22.00 Tax excl.

View

Soric XF 3 mm

WNC003XF

Lantor Soric XF is a general purpose non woven core material. Is a pressure stable polyester nonwoven and compatible with all regular types of resins, including polyester, vinylester, phenolic and epoxy.

€23.15 €28.01 Tax incl. €23.15 Tax excl.

View

Sphere.core PSI 3 mm for Vacuum Infusion and RTM

SCOREPSI3

€24.00 €29.04 Tax incl. €24.00 Tax excl.

View

SphereCel SBF for Hand lay-up, 6 mm

SPHERECEL-6

SphereCel SBF 6 mm is a non-woven core material, compatible with all regular types of resins, including polyester, vinyl ester, phenolic and epoxi. It is the cost effective solution for open mold processes.

€24.95 €30.19 Tax incl. €24.95 Tax excl.

View

Sphere.core SBC 6 mm for Hand lay-up

SPHERECORE SBC6

Core Material manufactured with polyester fabrics which is voluminizado by the embedded microspheres thermoplastic. Very elastic and formable when it is impregnated by the resin. Comparable to núcleoos as Coremat, U-PicaMat, etc

€27.30 €33.03 Tax incl. €27.30 Tax excl.

View

Sphere.core SBC IP 6 mm, for infusion

SCORESBCIP6

Sphere.core SBC IP is a pre-compressed, stitch-bonded glass fibre material which is volumised through embedded thermoplastic microspheres. Sphere.core SBC IP is amended with an additional polypropylene core (flow medium). Rcommended for infusion and injection (RTM or RTM light).

€29.00 €35.09 Tax incl. €29.00 Tax excl.

View