Wind turbine blade repair materials

Home

RAL 9018 Crystic GT-600 Isophthalic Gelcoat - BRUSH

€18.82 €18.82 VAT excl.

RAL 9018 Crystic GT-600 PAX Topcoat isoftálico - BRUSH

Gelcoats and topcoats

RAL 9018 Crystic GT-600 PAX isophtalic Topcoat - BRUSH

TCT9018B

€18.94 €18.94 VAT excl.

The topcoat Crystic® Ral 9018 GT-600 is a high-performance isophtalic topcoat, pre-accelerated and formulated for application with brush or roller.

RAL 7035 Crystic GT-600 PAX Topcoat isoftálico - BRUSH

Gelcoats and topcoats

RAL 7035 Crystic GT-600 PAX Isophtalic Topcoat - BRUSH

TCT7035BC

€18.94 €18.94 VAT excl.

The topcoat Crystic® Ral 7035 GT-600 is a topcoat isoftálico high-performance, preacelerado and formulated for application with brush or roller.

Sealant tape for vacuum bag with heat resistance up to 210 °C. Polyvalent and economic sealant tape recommended for high temperature cures up to 210°C (autoclave cycles). Economic and ideal for use on composite or metallic tools Easy to release from the tools once the mould has cooled down to room temperature. Rolls of 25 mm x 3 mm x 12.5 linear...

Vacuum bagging materials for composites

LSM7000 Vacuum Bag Sealant Tape (210 °C), width 25 mm

MESM7000-25

€19.00 €19.00 VAT excl.

Flashbreaker® 2CBS pressure sensitive tape

Vacuum bagging materials for composites

Flashbreaker® 1 All purpose pressure sensitive tape

€19.10 €19.10 VAT excl.

Flashbreaker® tapes are high temperature/ high tensile polyester films coated on both sides with pressure sensitive silicone adhesive.

Sealing mastic MA -AT 200Y for vacuum bag

Vacuum bagging materials for composites

Sealant Tape AT 200Y (204 ºC)

WVC200Y125020

€19.95 €19.95 VAT excl.

AT-200Y is a high adhesion sealant tape for sealing vacuum bags in vacuum bagging and infusion processes. Maximum temperature resistance: 204 ºC.

CRYSTIC FILLER X 401 is a pre accelerated highly thixotropic polyester compound, specially designed for surface finish at joint line. Application CRYSTIC FILLER X 401 has been developed for filling gaps at the joint line between the halves of wind mill blades.

Crystic Filler X401 Grey RAL 7035 polyester putty

Adhesives and fillers for composites

Crystic Filler X401 Grey RAL 7035 Gap Filling Polyester Putty

Scott Bader

WRPM0401

€20.31 €20.31 VAT excl.

DIADRAIN MP is a microporous flat vacuum channel. DIADRAIN MP is placed around the mold instead of the spiral pipe: when the resin reaches DIADRAIN MP, it will be stopped meanwhile the gas is still eliminated from the laminate.

Vacuum bagging materials for composites

Diadrain MP 50 mm Microporous Flat Vacuum Channel

WVC0050MP

€20.99 €20.99 VAT excl.

Vacuum bagging materials for composites

Vacuum bag PO120 75 microns 120 cm wide

WFIPO120/0120

€22.55 €22.55 VAT excl.

Vacuum bag of three layers (two external copolymer and one central polyamide ) ideal for composite molding processes by infusion techniques and vacuum compaction.

Bolsa de vacío tubular PO180 de 50 micrones y ancho 120 cm de 180 ºC

Vacuum bagging materials for composites

PO180 Tubular Vacuum Bag of 50 microns 120 cm wide, 180 ° C

PO180 is a polyamide / polypropylene tubular vacuum bag for infusion applications and vacuum bagging with any type of thermosetting resins and for oven curing of prepregs to a maximum temperature of 180 °C.

WVC50120TB

€28.98 €28.98 VAT excl.

K7666 is manufactured from polyester film, coated with high performance silicone adhesive. This tape can be used in a range of applications including vacuum moulding or vacuum infusion, in oven or autoclave.

Vacuum bagging materials for composites

High Temperature Adhesive Flash Tape K7666, 63 µ - 204 ºC

€29.95 €29.95 VAT excl.

Microporous peelable absorption blanket with Vacuoplex MP bleeder

Vacuum bagging materials for composites

Vacuoplex MP Microporous Complex Breather

WVPLEXMP/PA100

€36.54 €36.54 VAT excl.

VACUOPLEX MP is a microporous multilayer system used in manufacturing processes for vacuum moulding of composite materials with techniques such as prepreg, wet lay-up and thermoplastic.

Adhesives and fillers for composites

Crestabond M7-15 Methacrylate Adhesive

WCRM715

€36.80 €36.80 VAT excl.

Methacrylate adhesive for bonding metal (aluminum, steel, etc.), plastic (ABS, polycarbonate, PVC and methacrylate) and PRF.

Vacuum bagging materials for composites

PO180 Tubular Vacuum Bag of 75 microns 120 cm wide, 180 ° C

WVC75120TB

€42.59 €42.59 VAT excl.

Crestabond M1-05 is a toughened, two component acrylic adhesive designed for bonding composites, thermoplastics and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength and fatigue resistance properties across all bonded...

Acrylic and methacrylate adhesives

Crestabond M1 Methacrylate Adhesive x 490 ml

Scott Bader

€45.55 €45.55 VAT excl.

Resins for composite materials

Resoltech 1200 Hand lay-up Epoxy Resin

RESOLTECH 1200 is a state of the art laminating epoxy system, formulated without reactive diluents (primary cause of allergies) thus improving the H&S working conditions. It allows to manufacture small parts as well as large composite structures & tools with all the existing fibres. The system enables application by wet lay up, vacuum bagging and...

WRE1200

€45.88 €45.88 VAT excl.

Resins for composite materials

Resoltech 1050 Infusion Epoxy Resin

The 1050 epoxy laminating system is formulated to manufacture high performance lightweight structures with glass, carbon, aramid and basalt reinforcements with or without post-curing. This epoxy system is also suitable for the manufacture of small to very large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding.

WRE1050

€50.81 €50.81 VAT excl.

Vacuum bagging materials for composites

FIPO180 Bagging Film 50 microns 400 cm wide (115 cm folded) - 180 ºC

Polyamide / polypropylene vacuum bag for infusion applications and vacuum bagging with any type of thermosetting resins and for oven curing of prepregs to a maximum temperature of 180 °C. Film width: 400 cm. Roll width: 115 cm (supplied folded).

FIPO18050400-PLI

€52.49 €52.49 VAT excl.

Flexible epoxy adhesive Resoltech 3350HP / 3358HP

Adhesives and fillers for composites

Resoltech 3350HP Low Density Toughened Structural Epoxy Adhesive

Resoltech 3350HP is a low density toughened structural lightweight epoxy adhesive that enables durable lightweight bonding of materials such as PVC, PET & other core materials on composites structures, wood, aluminium or steel.

WRE3350HP

€54.95 €54.95 VAT excl.

Adhesives and fillers for composites

Resoltech 8050/8058 Epoxy Profiling & Fairing Filler

RESOLTECH 8050 / 8058 is a fast curing, lightweight, and easy sanding epoxy filler. It is a premium choice for profiling & fairing above and below the waterline for professional applicators on steel, aluminum and composite materials.

RE8050

€55.20 €55.20 VAT excl.

Home

LDPE Infusion Pipe Ø 12 x 14 mm

PEBD12-14SOMO

€55.50 €55.50 VAT excl.

Low density polyethylene pipe for all kind of thermosetting resins used for resin distribution in infusion and vacuum bagging processes. Maximum service temperature: 75 ºC.

Adhesives and fillers for composites

SikaForce®-818 L07

WSIKA7818L7

€56.55 €56.55 VAT excl.

High performance structural adhesive thixotropic type for bonding applications in turbine turbines.

ALEXIT® BladeRep Topcoat 12 is designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required. This twocomponent polyurethane topcoat meets or exceeds OEM standards and provides applicators with the ideal product for blade repairs.

Paints and varnishes for composites

ALEXIT® BladeRep Topcoat 12 white RAL 9018 Polyurethane coating

ALEXIT Bladerep

€65.62 €65.62 VAT excl.