Resins and Reinforcement Fibers

Our products

XM600/250 Combi Mat 600 g/m2 Biaxial E-Glass Fabric (+45°/-45°) / Mat 250 g/m2, 127 cm wide

Fibre Reinforcements

XM600/300 Combi Mat 600 g/m2 Biaxial E-Glass Fabric (+45°/-45°) / Mat 250 g/m2, 127 cm...

€8.95 €8.95 Tax incl. €8.95 Tax excl.

Combi Mat Biaxial E-glass is ideal for laminates with polyester, vinyl ester and urethane-acrylate resins. Made with a 600 g/m2 biaxial glass fabric stitched to a 250 g/m2 emulsion chopped strand mat. Especially recommended as high performance structural reinforcement for large composite parts. Very used for the production of composite boats, windblades...

View

Home

LDPE Infusion Pipe Ø 14 x 16 mm

PEBD14-16

€7.20 €7.20 Tax incl. €7.20 Tax excl.

Low density polyethylene pipe for all kind of thermosetting resins used for resin distribution in infusion and vacuum bagging processes. Maximum service temperature: 75 ºC.

View

Sealing mastic MA -AT 200Y for vacuum bag

Vacuum Bagging Materials

Sealant Tape TT-210-Y (210 ºC)

TT-210-Y

€15.00 €15.00 Tax incl. €15.00 Tax excl.

TT-210-Y is a low cost, high temperature multipurpose sealant. Easily removes from metal or composite tooling. It is suitable for curing applications up to 210ºC

View

Fibre Reinforcements

Polyester fabric 200 g/m2 Green, twill 2/2, DDc 200 T, width 120 cm

€19.00 €19.00 Tax incl. €19.00 Tax excl.

The Woven polyester fabric type Diolen fibers are of high tenacity, for the manufacture of pieces of composite imitation carbon seen.Ideal for working with any resin type thermosetting transparent.

View

Personal Protective Equipment

3M™ Gas and Vapour Filter, ABEK1, 6059 for epoxy

UU6059

€19.95 €19.95 Tax incl. €19.95 Tax excl.

3M™ Gas and Vapour Filter, ABEK1, 6059 filters are suitable for 3M™ 6000 Series Half and Full Face Masks. Specially recommended when working with epoxy resins.

View

Fibre Reinforcements

170 gsm Plain Weave Glass Fabric Tape, 25 mm wide

RRT170/2.5

€4.45 €4.45 Tax incl. €4.45 Tax excl.

170 gsm plain weave glass fabric tape with a 25 mm width. Suitable for local structural reinforcement using thermosetting resins: polyester, urethane-acrylate, vinyl ester or epoxy.

View

600 g/m2 COMPOFORCE® Fiberglass Chopped Strand Emulsion Mat (CSM)

Fibre Reinforcements

300 gsm COMPOFORCE® Fiberglass Chopped Strand Emulsion Mat (CSM)

MAT-E-SC-300

€12.00 €12.00 Tax incl. €12.00 Tax excl.

300 gsm COMPOFORCE® is a Fibreglass Chopped Strand Emulsion Mat (CSM) made of E-glass strands held together by an emulsion binder which makes it perfectly suitable for use with polyester, vinyl ester and urethane-acrylate resins (Crestapol). The glass strands are treated with a sizing system containing a silane coupling agent.

View

Wind Blades Repair

Heating Blanket 0-90°C with insulation

€465.00 €465.00 Tax incl. €465.00 Tax excl.

Kuhlmann industrial heating blankets are the optimal product when it comes to safely and effectively, having to heat elements to a specific temperature.

View

Out-of-Stock

Home

Cyanoacrylate adhesive Quick Mix Multifix 10g

5006-001094

€18.75 €18.75 Tax incl. €18.75 Tax excl.

Quick Mix Multifix is a two component cyanoacrylate adhesive ideal for various repairs. It has the best adhesive properties on many different materials. Fast curing Extremely shock resistant Large filling capacity For fast professional repairs

View

Home

Rheological Additive

AditivoReo

€18.00 €18.00 Tax incl. €18.00 Tax excl.

Liquid rheology additive for solvent-borne coatings, adhesives, and sealants to improve anti-sagging and anti-settling properties. Recommended for use with epoxy resins.

View

-10%

Primers

Quick Wash Primer (Primer for Metals)

UU5011-1067

€13.95 €15.50 €13.95 Tax incl. €13.95 Tax excl.

Primer/Adherence promoter applied directly to bare metals such as steel, zinc and aluminium. Fast drying and repaintable even wet on wet after evaporation. Excellent anti-corrosive properties. To be used before any filler or primer. Never use polyester based products over Quick Wash Primer.

View

Tools, Equipments / Ancillaries

Plastic Mixing Cup with Lid

(10)

€0.75 €0.75 Tax incl. €0.75 Tax excl.

Plastic mixing cups for all type of resins, paints, gelcoats, lacquers, putties, adhesives, etc. Resistant to all type of solvents. Include a volumetric scale.

View

Tools, Equipments / Ancillaries

White Bristle Laminating Brush

(5)

€1.15 €1.15 Tax incl. €1.15 Tax excl.

Plastic handle & solvent resistant white bristle laminating brushes. Ideal for application of thermosetting resins, gel coats and top coats. Can be cleaned with acetone or methylethylketone.

View

Tools, Equipments / Ancillaries

Mirka Abranet Net Sanding Abrasive (Ø 150 mm)

(3)

€1.12 €1.12 Tax incl. €1.12 Tax excl.

The multifunctional and classic Abranet abrasive is especially developed for sanding putty, primers, lacquers, composite materials and a wide range of other materials for industrial use.

View

Tools, Equipments / Ancillaries

Pasteur pipette 5 ml

M9M2 s6

(4)

€0.28 €0.28 Tax incl. €0.28 Tax excl.

Plastic pipette for catalysts and solvents measurement.

Tools, Equipments / Ancillaries

Disposable Plastic Mixing Stirrer

UU2012-001333

(6)

€0.22 €0.22 Tax incl. €0.22 Tax excl.

Disposable mixing stirrers for paints, resins, gel & topcoats, putties, adhesives and so on. Lenght: 20 cm (7.87 in)

View

Resins

Resoltech 1050 Infusion Epoxy Resin

RESOLTECH

WRE1050

(12)

€32.75 €32.75 Tax incl. €32.75 Tax excl.

The 1050 epoxy laminating system is formulated to manufacture high performance lightweight structures with glass, carbon, aramid and basalt reinforcements with or without post-curing. This epoxy system is also suitable for the manufacture of small to very large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding.

View

Rigid plastic wedge for demolding composite parts.

Tools, Equipments / Ancillaries

Demoulding Rigid Plastic Wedge

(3)

€3.60 €3.60 Tax incl. €3.60 Tax excl.

Rigid plastic wedge for demoulding composite parts and tools.

View

Resins

Resoltech 1070 Hand Lay-Up Clear Epoxy Resin

RESOLTECH

WRE1070

(20)

€41.59 €41.59 Tax incl. €41.59 Tax excl.

RESOLTECH 1070 is a hand lay-up epoxy laminating system formulated to produce clear laminates and high gloss coatings with good UV stability and good mechanical properties while retaining some flex for improved fatigue performance such as for surfboards. Very fast hardening in film.

View

Vacuum Bagging Materials

Sealant Tape LSM5200 High Stickiness (140 ºC)

WVC5200

(10)

€6.60 €6.60 Tax incl. €6.60 Tax excl.

LSM5200 es una masilla de cierre para bolsas de vacío con resistencia térmica de hasta 140 ºC.

View

Aluminum Rollers to Remove Air from Sturdier Fabrics and Laminations

Tools, Equipments / Ancillaries

Aluminium Finned Roller

(9)

€8.43 €8.43 Tax incl. €8.43 Tax excl.

Air removal aluminum roller ideal to compact laminations by hand contact with any reinforcement fibre any thermosetting resin.

View

Multiple transportation options

Choose your transportation according to your needs. We offer Express transport and transport of dangerous products and large volumes.

Personalized technical advice

We offer personalized technical advice through our chat, phone or email. When you have any questions, contact us.

Secure payment

Make your payments by credit card through the Redsys POS, Paypal or by bank transfer.

Best Seller

Tools, Equipments / Ancillaries

Plastic Mixing Cup with Lid

(10)

€0.75 €0.75 Tax incl. €0.75 Tax excl.

Plastic mixing cups for all type of resins, paints, gelcoats, lacquers, putties, adhesives, etc. Resistant to all type of solvents. Include a volumetric scale.

View

Tools, Equipments / Ancillaries

White Bristle Laminating Brush

(5)

€1.15 €1.15 Tax incl. €1.15 Tax excl.

Plastic handle & solvent resistant white bristle laminating brushes. Ideal for application of thermosetting resins, gel coats and top coats. Can be cleaned with acetone or methylethylketone.

View

Tools, Equipments / Ancillaries

Mirka Abranet Net Sanding Abrasive (Ø 150 mm)

(3)

€1.12 €1.12 Tax incl. €1.12 Tax excl.

The multifunctional and classic Abranet abrasive is especially developed for sanding putty, primers, lacquers, composite materials and a wide range of other materials for industrial use.

View

Tools, Equipments / Ancillaries

Pasteur pipette 5 ml

M9M2 s6

(4)

€0.28 €0.28 Tax incl. €0.28 Tax excl.

Plastic pipette for catalysts and solvents measurement.

Customer Feedbacks

Average rating for our customers

4.9 ( On 5 )

Average rating:

Como usual, o processamento e entrega dos bens foram rápidos. Ob...

Average rating:

Bom produto para pigmentar a resina epóxica.

Average rating:

Buen trato y mejor atención, envíos rápidos.

Average rating:

Inmejorable resina para laminación manual y vacío

Average rating:

Feedback without comment

Average rating:

Feedback without comment

Average rating:

Feedback without comment

Average rating:

Perfekt!

Average rating:

trés bon !

Average rating:

Entrega com rapidez, simpatia, bem embalado.

Average rating:

É um tecido que permite obter rigidez estrutural com baixo peso.

Average rating:

Este produto é bom. Uso-o quando preciso de um preenchimento mai...

Average rating:

Feedback without comment

Average rating:

Feedback without comment

Average rating:

Very good quality and fast delivery I will buy again

Average rating:

Producto muy bueno

Average rating:

Producto muy bueno

Average rating:

Feedback without comment

Average rating:

Feedback without comment

Average rating:

Feedback without comment

More feedbacks...

Quality guarantee

We distribute materials from the best brands and manufacturers.

Our Brands

About Us

Latest posts

LIGHTRANS PROJECT - 4ª ANNUITY

Posted in: PROJECTS

April 29th 2021

301 views 0 Liked
Read more
LIGHTRANS PROJECT - January 2021

Posted in: PROJECTS

January 19th 2021

1044 views 0 Liked
Read more
NERO PROJECT - December 2020

Posted in: PROJECTS

December 21st 2020

1174 views 0 Liked
Read more
Granite and epoxy resin table

Posted in: TUTORIALS

November 17th 2020

3448 views 56 Liked
Read more

View all latest posts