Tax incl. Tax excl.

Vacuum Bagging Materials

In this section we offer process materials including vacuum bagging consumables, infusion materials and reusable vacuum systems.

The processes in which these materials are used include prepreg processing, resin infusion, hand layup, filament winding, compression moulding of thermoplastic composites and glass lamination.

T Connector for 10 mm pipes

WACIT10PP
 (1)
Plastic T connector for pipe with an internal diameter of 10 mm. Ideal for connecting pipes in vacuum and infusion processes.
€0.44 €0.44 Tax incl. €0.36 Tax excl.
Infusion Spiral Plug Eco 12 mm
  • New

Infusion Spiral Plug Eco 12 mm

ACIGSPI12-14
Specific connectors for vacuum or resin which can be clipped directly onto adapted spiral tubes. In the upper part, their internal conical shapes allow an easy insertion and a good tightening to facilitate the installation of the consumables.
€1.38 €1.38 Tax incl. €1.14 Tax excl.

Cork Edge Retainer for Infusion

WVC0024
 (2)
Cork strips of 2.4 mm thick and 12 mm wide used to delimit the contour of parts manufactured by infusion and thereby achieving uniform pieces edges. Using this material dangerous irregular fiber reinforced tabs are avoided.
€1.16 €1.16 Tax incl. €0.96 Tax excl.
Infusion Plug Eco for Diadrain - 12 mm
  • New

Infusion Plug Eco for Diadrain - 12 mm

ACINF47-12
Infusion plug Eco which connects to 12 mm diameter absorption channels in order to inject resin during infusion processes. Ideal for the Diadrain infusion line.
€1.73 €1.73 Tax incl. €1.43 Tax excl.
Infusion Plug Eco for Diadrain - 16 mm
  • New

Infusion Plug Eco for Diadrain - 16 mm

ACINF51-16
Infusion plug Eco which connects to 16 mm diameter absorption channels in order to inject resin during infusion processes. Ideal for the Diadrain infusion line.
€1.82 €1.82 Tax incl. €1.50 Tax excl.
Infusion Spiral Plug Eco 16 mm
  • New

Infusion Spiral Plug Eco 16 mm

ACIGSPI14-17
SPIRALPLUG Éco 16 is a specific connector for vacuum or resin supply manifolds. With its Ω shape, it can be clipped directly onto size 12-14 or 14-17 booms: SpiralNet, SpiralPlex, Diabreaker & Spiral MP. In the upper part, it is compatible with 14-16 LDPE tubing, its internal conical shape allowing for easy insertion and clamping to facilitate the...
€1.67 €1.67 Tax incl. €1.38 Tax excl.
"L" Vacuum connectors
  • New

Vacuum L connector 16 mm

WACIL16PP
Nylon barb elbow fittings for plastic pipes in vacuum bagging operations or vacuum infusion. Tube diameter: 16 mm
€2.18 €2.18 Tax incl. €1.80 Tax excl.

10 mm resin Valve

WACIV10PPUD
 (1)
Plastic threaded fitting valve for manual resin flow control of thermosetting resins during the infusion process.
Out-of-Stock
€2.90 €2.90 Tax incl. €2.40 Tax excl.

T Connector for 16 mm pipes

WACIT16PP
Plastic T connector for pipes with an internal diameter of 15 mm. Ideal for connecting pipes in vacuum and infusion processes.
€2.61 €2.61 Tax incl. €2.16 Tax excl.

Disposable 12 mm Plastic Infusion plug for Diadrain Flat Channel

WACINF50/PLUG12
Disposable plastic infusion plug for connection of resin distribution pipes with 12 mm extrenal diameter (10 mm inner diameter). Ideal for connecting Diadrain resin channel. 
€2.76 €2.76 Tax incl. €2.28 Tax excl.

Flexible Polyurethane Tube, Ø 8 x 6 mm

DISPU8
Flexible polyurethane tube for pneumatic applications. Manufactured with two different types of raw materials for two types of flexibility. We recommend using it together with the MTI Hose absorption tube in infusion processes.
€2.64 €2.64 Tax incl. €2.18 Tax excl.

16 mm Infusion Control Valves for Resin Flow

WACIV16PPUD
Plastic threaded fitting valve for manual resin flow control of thermosetting resins during the infusion process.
€3.05 €3.05 Tax incl. €2.52 Tax excl.

PA80 83 g/m2 Taffeta Weave Peel Ply , 0,5 m wide

MPA80BA0500
 (3)
"PA80" of 83 g/m2 is a taffeta weave polyamide peel ply with standard quality. Peel plies are used to impart a textured surface to the moulded component to improve adhesion in secondary bonding or painting.
€4.36 €4.36 Tax incl. €3.60 Tax excl.

MTI Valve for infusion

 (1)
With the membrane tube infusion process (MTI®) DD-Compound has developed the innovation for vacuum infusion. The new, unique MTI® valve perfects this process.
€4.34 €4.34 Tax incl. €3.59 Tax excl.
Disposable Infusion Spiral Plug 16 mm
  • New

Disposable Infusion Spiral Plug 16 mm

ACIGSPIR14-17
Disposable plastic infusion plug for connection of the resin absortion pipes of 12 mm extrenal diameter. Ideal for connecting Spiralnet resin channel.
€3.99 €3.99 Tax incl. €3.30 Tax excl.

Disposable Infusion Spiral Plug 12 mm

WACIGSPIR12-14
 (1)
Disposable plastic infusion plug for connection of the resin absortion pipes of 12 mm extrenal diameter. Ideal for connecting Spiralnet resin channel.
€4.43 €4.43 Tax incl. €3.66 Tax excl.

L connector 10 mm (3/8")

ACIL10PP
Nylon barb elbow fittings for plastic pipes in vacuum bagging operations or vacuum infusion. Tube diameter: 3/8 inch (10 mm).
€3.63 €3.63 Tax incl. €3.00 Tax excl.

PA80 peel ply band 83 gr/m² 120 mm

MPA80BA0120
"PA80" of 83 g/m2 is a taffeta weave polyamide peel ply with standard quality. Peel plies are used to impart a textured surface to the moulded component to improve adhesion in secondary bonding or painting.
€3.63 €3.63 Tax incl. €3.00 Tax excl.

Diabreaker Resin Brake Line - Vacuum Channel

DIABREAKER100
DIABREAKER is made of a non-woven polyester filled with thermoplastic microspheres, laminated with a release film, and holding a spiral tube, which delivers the vacuum all along the product.
€5.08 €5.08 Tax incl. €4.20 Tax excl.

LDPE Infusion Pipe Ø 10 x 12 mm

PEBD10-12
 (1)
Low density polyethylene pipe for all kind of thermosetting resins used for resin distribution in infusion and vacuum bagging processes. Maximum service temperature: 90 ºC.
€5.81 €5.81 Tax incl. €4.80 Tax excl.

PA80 83 g/m2 Taffeta Weave Peel Ply, 1.25 m wide

WMPA80/1360
 (2)
"PA80" of 83 g/m2 is a taffeta weave polyamide peel ply with standard quality. Peel plies are used to impart a textured surface to the moulded component to improve adhesion in secondary bonding or painting.
€7.26 €7.26 Tax incl. €6.00 Tax excl.

FIPO180 Tubular Vacuum Bag 50 microns, 30 cm wide

WFIPO1805030T
 (3)
Tubular vacuum bag made of polyamid/polypropylene for infusion and vacuum bagging using any thermosetting resin. Especially developed for prepregs oven curing at a maximun tempreture of 180 ºC.
€7.26 €7.26 Tax incl. €6.00 Tax excl.

PO160 Tubular Vacuum Bag 70 microns 100 mm wide (63.66 mm diameter)

FIPO16070100T
Tubular vaccum bag made of copolymer PE CPA PE, green colour, ideal for all types of processes with thermosetting resins: urethane- acrylates, polyester, vinyl ester, epoxy, etc. Ideal for infusion and vacuum compaction processes, developed also for prepregs oven curing at a maximun temperature of 160 °C.
€7.04 €7.04 Tax incl. €5.82 Tax excl.

150 gsm Non Woven Breather Felt Zetafelt F 3553, width 152 cm

F3553/150
Non woven breather felt made of polyester fibres. Recommended for moulding of elaborate composite parts. Suitable for eliminating any excess of resin from vacuum bagged laminates and ease the debulk process of the laminates, both during wet hand lay-up and prepreg lamination processes.
€6.53 €6.53 Tax incl. €5.40 Tax excl.

64 g/m2 PA64 Taffeta Weave Polyamide Peel Ply, 1 m wide

MPA64BA1000
 (1)
PA64 is designed to be used on epoxy and polyester composite systems. This high tenacity fabric leaves afine surface impression for painting and secondary bonding. There is no release agent or silicon in the fabric: PA64 is made of synthetic polyamide fiber that offers a peel ply surface free from contamination: PA64 is scoured and heat setting.
€6.75 €6.75 Tax incl. €5.58 Tax excl.

INFUSION BOX Fitting

WACIBOX25PE
Polyolefin foam fitting resistant to any kind of thermosetting resin. 3/4" (19,05 mm) plastic threaded fittings I shape can be adjust for connection of plastic pipes with an inner diameter of 10 and 16 mm respectively. Ideal for injecting thermosetting resins with 5 cm wide plastic omega profiles.
€7.70 €7.70 Tax incl. €6.36 Tax excl.

DIADRAIN 50 mm Infusion Flat Resin or Vacuum Channel 50 mm

WDIADRAIN50
 (1)
DIADRAIN is a flat resin or vacuum channel. It consists of a three-dimensional polyester filament core structure wrapped in a non woven polyester sleeve. DIADRAIN is flexible, easy to cut to size and function as resin supply channel or vacuum channel in vacuum infusion process.
€8.42 €8.42 Tax incl. €6.96 Tax excl.

Blade Runner® Connector

BRCONNECTOR
Blade Runner® Connector for Blade Runner® resin feed line. The connector has been specially developed for the resin feed line Blade Runner®. With this connector, inlet points can be set easily and safely. The connector is placed on the resin line. The matching connection tap is then inserted from above. Two different connection taps are available: One...
Last items in stock
€7.99 €7.99 Tax incl. €6.60 Tax excl.

Sealant Tape LSM5200 High Stickiness (140 ºC)

WVC5200
 (10)
LSM5200 es una masilla de cierre para bolsas de vacío con resistencia térmica de hasta 140 ºC.
Out-of-Stock
€7.99 €7.99 Tax incl. €6.60 Tax excl.

Spiral MP Microporous Vacuum Channel Ø 12/14 mm

SPIRALMP1214
 (1)
Microporous vacuum channel with 12-14 mm spiral pipe.The resin is stopped while the gas is eliminated from the laminate.
€8.20 €8.20 Tax incl. €6.78 Tax excl.

LDPE Infusion Pipe Ø 14 x 16 mm

PEBD14-16
Low density polyethylene pipe for all kind of thermosetting resins used for resin distribution in infusion and vacuum bagging processes. Maximum service temperature: 75 ºC.
€8.71 €8.71 Tax incl. €7.20 Tax excl.

Sealant Tape LSM6000 (90 ºC)

WVC6000CJ
 (1)
Sealant tape for vacuum bag sealing. Maximum working temperature: up to 90 °C.
€9.44 €9.44 Tax incl. €7.80 Tax excl.

MTI Hose Infusion Vacuum Line

MTI® is the abbreviation for Membrane Tube Infusion and describes a suction hose sheathed with a microporous membrane for vacuum infusion. The MTI® hose is an air-permeable and resin-blocking line for the evacuation of air. Its ease of use and a considerable simplification of the infusion process makes MTI® hose a great choice.
€8.57 €8.57 Tax incl. €7.08 Tax excl.

Vacuum Infusion Translucent Diatex Spiral Tube 12 x 14.9 mm

WVC12149
 (2)
Flexible vacuum infusion translucent plastic spiral tube for resin distribution of all types of thermosetting resins and for vacuum bagging processes. Maximum service temperature: 90 ºC.
€8.57 €8.57 Tax incl. €7.08 Tax excl.

Diatex Spiral Translucent Tube 9 x 12 mm

ACIGSPIR9-12
Vacuum Infusion Translucent Diatex Spiral Tube for infusion of all types of thermosetting resins and vacuum generation. External diameter: 12 mmInternal diameter: 9 mm
€10.16 €10.16 Tax incl. €8.40 Tax excl.

QAC98 Polyethylene Infusion Pipe

WPEHD1012
 (1)
QAC98 is an infusion high density polyethylene pipe suitable for all types of thermosetting resins. It can be used as resin distributor and vacuum line. Maximum service temperature: 90 ºC.
€10.16 €10.16 Tax incl. €8.40 Tax excl.

LDPE Infusion Pipe 12 mm x 1.3 mm

WVC0007
Low density polyethylene pipe for all kind of thermosetting resins used for resin distribution in infusion and vacuum bagging processes. Maximum service temperature: 90 ºC.
€10.16 €10.16 Tax incl. €8.40 Tax excl.

ELA20 Perforated Release Film 25 microns

WFIELA20P3100
 (2)
ELA20 is a polyethylene copolymer perforated release with P3 type holes. Used between the peel ply and the breather cloth during the vacuum bagging process. Allows the flow of air trapped and excess of resin in the laminates.
€10.16 €10.16 Tax incl. €8.40 Tax excl.

Vi5 Internal Infusion Mesh

WVC0005
 (1)
VI5 is an internal knitted infusion mesh designed for use in vacuum assisted resin infusion processes.
Out-of-Stock
€10.16 €10.16 Tax incl. €8.40 Tax excl.

SPIRALNET-OM70 RESIN CHANNEL 12/14 mm

WOM701214
SPIRALNET-OM70 RESIN CHANNEL 12/14 is a tube mesh OM70 together with a spiral tube in order to optimize the resin distribution and avoid the marking of the laminate during tthe infusion process.
€10.89 €10.89 Tax incl. €9.00 Tax excl.

Sealant Tape LSM7000 (210 ºC)

WVC7000
 (2)
Sealant tape for vacuum bag with heat resistance up to 210 °C.
€11.47 €11.47 Tax incl. €9.48 Tax excl.

PA80AD Adhesive Peel Ply 80 g/m2, 1550 mm wide

 (1)
PA80AD is a taffeta weave polyamide adhesive Peel Ply of 80 g/m2 (2,36 Oz/Yd²) with removable plastic film on the sticky surface.
Last items in stock
€12.41 €12.41 Tax incl. €10.26 Tax excl.

INFUPLEX FLONET Vacuum Infusion Complex Infusion Mesh, 145 cm wide

WVC0145
 (2)
INFUPLEX are multilayer systems used in manufacturing processes for vacuum infusion of composite materials. The systems combine two vacuum consumables into a two-layer unit: a perforated film ELA20P1, permeable to resin and gases; and a net bleeder on top.
€11.62 €11.62 Tax incl. €9.60 Tax excl.
Product added to wishlist