Tax incl. Tax excl.

Multiaxial carbon fibre reinforcement

Multiaxial carbon fibre materials for manufacturing composite parts and moulds. Compare biaxial, triaxial and quadriaxial constructions according to the laminate's fibre orientations.

What to consider when choosing

Choosing multiaxial carbon

Products bring together layers oriented in different directions and stitched together. This construction should be distinguished from conventional woven fabric and unidirectional material; similar areal weights do not mean the same fibre arrangement.

Check the product data sheet for fibre type, orientations and intended resin. Material selection must follow the part design, whether you are manufacturing a part or constructing a mould.

Applications and material selection

For parts and moulds, triaxial and quadriaxial references combine several fibre directions in stitched layers. Match each layer's orientation to the intended laminate; biaxials with different fibre orientations are not equivalent even at the same weight.

For a specific additional direction browse UD carbon fibre material; for a woven visible face, compare carbon fibre fabrics.

300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-302, 945 mm wide
Reinforcement fibres

300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-301, 945 mm wide

TCBX301-945
€25.00 €25.00 VAT excl.
300 g/m2 biaxial carbon fabric for high performance applications where high strength and low weight are required. Produced with two 150 g/m2 layers of unidirectional fabric, oriented at +45° and -45°. Thanks to its Toray general purpose sizing (nº 5) it is a suitable carbon fabric for the manufacturing of composite parts and tools with epoxy,...
View product
300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-302, 945 mm wide
Reinforcement fibres

300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-302, 945 mm wide

TCBX302-945
€28.00 €28.00 VAT excl.
300 g/m2 biaxial carbon fabric for high performance applications where high strength and low weight are required. Produced with two 150 g/m2 layers of unidirectional fabric, oriented at +45° and -45°. Thanks to its Toray general purpose sizing (nº 5) it is a suitable carbon fabric for the manufacturing of composite parts and tools with epoxy,...
View product
Biaxial Carbon Fabric +-45º C-PLY™ SP BX250S C5 12K HS/P11 250 g/m2, width 135 cm (SPOT)
Composite material special offers

Biaxial +-45º Carbon Fabric C-PLY™ SP BX250SPLY™ SP BX250S C5 12K HS/P11 250 g/m2, width 135 cm (SPOT)

CBX250SC5/135
€32.75 €32.75 VAT excl.
250 g/m2 biaxial carbon fabric for high-performance applications requiring high mechanical strength and low weight. Manufactured from two layers of unidirectional fabric of 125 g/m2 each, oriented at +45° and -45°.Features a powder epoxy sizing (10 g/m2) on one face to increase stability and prevent fiber separation. This is a Huntsman LT3366...
View product
300 gsm Biaxial Carbon +-45º C-PLY™ SP BX 300 C3,4 24K HS Biaxial, width 127 cm (SPOT)
Composite material special offers

240 gsm Biaxial Carbon +-45º C-PLY™ SP BX240 C3,3 50K HS Biaxial, width 127 cm (SPOT)

CBX240C33/127
€35.00 €35.00 VAT excl.
240 g/m2 NCF biaxial carbon fabric for high performance applications where high strength and low weight are required. Produced with two 120 g/m2 layers of unidirectional fabric, oriented at +45° and -45°. Suitable for manufacturing of composite parts and tools with epoxy, phenolic, polyester, urethane-acrylate or vinyl ester resins by hand lay-up,...
View product
240 gsm C-Ply SP BT240 0º/90º Biaxial Carbon Fibre, 125 cm wide (SPOT)
Composite material special offers

440 gsm C-Ply SP BT440 0º/90º Biaxial Carbon Fibre, 125 cm wide (SPOT)

FCBT24050K
€35.00 €35.00 VAT excl.
440 gsm 0º/90º Biaxial 50K S Carbon Fibre Cloth suitable for high performance applications where high strength and low weight are required. Produced with two layers of 220 sqm high strength (HS) unidirectional 50K carbon layers oriented at 0° and 90°. Suitable for manufacturing composite parts and tooling using epoxy, urethane-acrylate or vinyl ester...
View product
300 gsm Biaxial Carbon +-45º C-PLY™ SP BX 300 C2,5 24K T800S (epoxy binder fixation), width 125 cm (SPOT)
Composite material special offers

300 gsm Biaxial Carbon +-45º C-PLY™ SP BX 300 C2,5 24K T800S (epo0xy binder fixation), width 125 cm (SPOT)

CBX300SP/125
€37.00 €37.00 VAT excl.
300 g/m2 biaxial carbon fabric for high performance applications where high strength and low weight are required. Produced with two 150 g/m2 layers of unidirectional fabric, oriented at +45° and -45°. It is produced with an epoxy powder fixation on one side of the fabric. Suitable for manufacturing of composite parts and tools with epoxy resins by hand...
View product
615 gsm (±45°/90°/0°) Saertex Quadaxial hybrid glass-carbon Q-EC-615, 127 cm wide
Reinforcement fibres

615 gsm (±45°/90°/0°) Saertex® Quadaxial hybrid glass-carbon Q-EC-615, 127 cm wide

SAERTEX
TCQ615-1270
€37.65 €37.65 VAT excl.
Hybrid glass-carbon fabric Saertex Quadaxial 615 g/m² for high-performance applications where high mechanical strength and low weight are required. Made with two layers of unidirectional E glass fabric of 600 TEX and 200 g/m², oriented at ±45°, and two layers of 12K Grafil 34-700 WD unidirectional carbon with 0.7% A. The first carbon oriented at 0° has a...
View product
406 gsm 0º/90º Biaxial 50K Saertex® B-C-406 Carbon Fibre Cloth, 127 cm wide
Reinforcement fibres

406 gsm 0º/90º Biaxial 50K Saertex® B-C-406 Carbon Fibre Cloth, 127 cm wide

SAERTEX
TCBX406
€40.15 €40.15 VAT excl.
406 gsm 0º/90º Biaxial 50K Saertex B-C-406 Carbon Fibre Cloth suitable for high performance applications where high strength and low weight are required. Produced with two layers of 200 sqm unidirectional carbon Zoltek Panex 35-13 50K layers oriented at 0° and 90°. Suitable for manufacturing composite parts and tooling using epoxy, urethane-acrylate or...
View product
606 gsm 0º/90º Biaxial 50K Saertex B-C-606 Carbon Fibre Cloth, 127 cm wide
Reinforcement fibres

606 gsm 0º/90º Biaxial 50K Saertex® B-C-606 Carbon Fibre Cloth, 127 cm wide

SAERTEX
TCBX0/90-606
€41.00 €41.00 VAT excl.
606 gsm 0o/90o Biaxial 50K Saertex B-C-606 Carbon Fibre Cloth suitable for high performance applications where high strength and low weight are required. Produced with two layers of 300 sqm unidirectional carbon Zoltek Panex 35-13 50K layers oriented at 0° and 90°. Suitable for manufacturing composite parts and tooling using epoxy, urethane-acrylate,...
View product
606 gsm +45º/-45º Biaxial 50K Saertex® X-C-606 Carbon Fibre Cloth, 127 cm wide
Mould and model preparation

606 gsm +45º/-45º Biaxial 50K Saertex® X-C-606 Carbon Fibre Cloth, 127 cm wide

SAERTEX
TCBX606
€47.50 €47.50 VAT excl.
606 gsm +45º/-45º Biaxial 50K Saertex X-C-606 Carbon Fibre Cloth suitable for high performance applications where high strength and low weight are required. Produced with two layers of 300 sqm unidirectional carbon Zoltek Panex 35-13 50K layers oriented at +45° and -45°. Suitable for manufacturing composite parts and tooling using epoxy, urethane-acrylate...
View product
600 g/m2 50K Stitched Biaxial Carbon Fabric 0º/90º C-Ply SP BT600 P13 st3,4, 125 cm wide (SPOT)
Composite material special offers

600 g/m2 50K Stitched Biaxial Carbon Fabric 0º/90º C-Ply SP BT600 P13 st3,4, 125 cm wide (SPOT)

FCSPBT600P13
€48.75 €48.75 VAT excl.
C-PLY™ SP BT600 CT3,4 50K HS is a 600 gsm biaxial spread-tow carbon NCF, 0°/-90°, 300 gsm/ply. It is made using 50K HS carbon fiber. The heavy-tow carbon fiber spreading process enables the manufacture of homogeneous plies combined using a hybrid chain/tricot stitch. Not recommended for infusion processes. Ideal for hand lay-up applications. Type of...
View product
806 gsm ±45°/90°/0° Quadriaxial 50K Saertex® Q-C-806 Carbon Fibre Cloth, 127 cm wide
Reinforcement fibres

806 gsm ±45°/90°/0° Quadriaxial 50K Saertex® Q-C-806 Carbon Fibre Cloth, 127 cm wide

SAERTEX
TCQX806
€52.70 €52.70 VAT excl.
806 gsm ±45°/90°/0° Quadriaxial 50K Saertex Q-C-806 Carbon Fibre Cloth suitable for high performance applications where high strength and low weight are required. Produced with four layers of 200 sqm unidirectional carbon Zoltek Panex 35-13 50K oriented at ±45°/90°/0°. Suitable for manufacturing composite parts and tooling using epoxy, urethane-acrylate...
View product
300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-304, 945 mm wide
Mould and model preparation

300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-304, 800 mm wide

SAERTEX
TCBX304-800
€219.00 €219.00 VAT excl.
304 g/m2 biaxial carbon fabric for high performance applications where high strength and low weight are required. Produced with two 149 g/m2 layers of unidirectional fabric, oriented at +45° and -45°. Thanks to its Toray general purpose sizing (nº 5) it is a suitable carbon fabric for the manufacturing of composite parts and tools with epoxy,...
View product
300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-302, 945 mm wide
Reinforcement fibres

300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-307, 1570 mm wide

TCBX307-1570
€678.69 €678.69 VAT excl.
300 g/m2 biaxial carbon fabric for high performance applications where high strength and low weight are required. Produced with two 150 g/m2 layers of unidirectional fabric, oriented at +45° and -45°. Thanks to its Toray general purpose sizing (nº 5) it is a suitable carbon fabric for the manufacturing of composite parts and tools with epoxy,...
View product
300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-304, 945 mm wide
Out-of-Stock
Reinforcement fibres

300 g/m2 12K Biaxial Carbon Fabric (+45/-45º) Saertex® X-C-304, 945 mm wide

SAERTEX
TCBX304-945
€25.00 €25.00 VAT excl.
304 g/m2 biaxial carbon fabric for high performance applications where high strength and low weight are required. Produced with two 149 g/m2 layers of unidirectional fabric, oriented at +45° and -45°. Thanks to its Toray general purpose sizing (nº 5) it is a suitable carbon fabric for the manufacturing of composite parts and tools with epoxy,...
View product
406 gsm 0º/90º Biaxial 50K Saertex® B-C-406 Carbon Fibre Cloth, 127 cm wide
Out-of-Stock
Reinforcement fibres

600 gsm 0º/90º 24K Biaxial Carbon Saertex® B-C-605, 127 cm wide

SAERTEX
TCBX605-1270
€29.95 €29.95 VAT excl.
Saertex biaxial carbon fabric 600 g/m² for high-performance applications where high mechanical strength and low weight are required. Made with two layers of unidirectional Toray T620Sc 50C 24K fabric of 300 and 299 g/m² each, oriented at 0° and 90° respectively. Ideal for combining with epoxy, phenolic, urethane-acrylic, polyester, or vinyl ester...
View product
Product added to wishlist
WhatsApp
Product added to comparison.