Tax incl. Tax excl.

Carbon / Epoxy

MTFA500 Epoxy Resin Adhesive Film for Prepregs, 1250mm

MTFA500150
 (1)
MTFA500 (DF044) Adhesive Film  MTFA500 (DF044) adhesive resin film is designed to cure between 80 and 120°C, allowing flexibility in component manufacture.  
Out-of-Stock
€60.44 €60.44 Tax incl. €49.95 Tax excl.

Prepeg Carbon-Epoxy VTC401-UD100-12K-T700-40%RW-300

T0355
 (1)
VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture.
Out-of-Stock
€64.01 €64.01 Tax incl. €52.90 Tax excl.

300 gsm Forged Carbon Prepreg SPX25071 SFP-45%RW, 1250mm wide

PPCSFP300
SPX25071 Forged Carbon SFP is a 140°C TG epoxy short fibre prepreg system (SFP) suitable for thinner wall sections and lower pressure processing than traditional Carbon Fibre SMC (CSMC). 
Out-of-Stock
€68.43 €68.43 Tax incl. €56.55 Tax excl.

Carbon - Epoxy Prepreg MTC510-C200T-HS-3K-42%RW Twill 2x2 of 200 g/m2

WMTC510-C200T
 (3)
MTC510 is an epoxy resin system designed to cure between 80°C and 120°C allowing flexibility in component manufacture. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format.
€75.93 €75.93 Tax incl. €62.75 Tax excl.

Carbon - Epoxy Prepreg MTC510-C200-PW-HS-3K-42%RW Plain Weave of 200 g/m2, 1250 mm wide

MTC510-C200-PW
 (1)
MTC510 is an epoxy resin system designed to cure between 80°C and 120°C allowing flexibility in component manufacture. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format.
€76.23 €76.23 Tax incl. €63.00 Tax excl.

200 gsm Twill Carbon-Epoxy Prepreg VTC401-C200T-HS-3K-42%RW, Width 1250 mm

VTC401C200T
VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture.
€78.65 €78.65 Tax incl. €65.00 Tax excl.

Carbon-Epoxy Prepreg VTC401-UD300-T700-24K-37%RW-300P

SHD1022-300
VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture.
Out-of-Stock
€81.07 €81.07 Tax incl. €67.00 Tax excl.

450 gsm Forged Carbon Prepreg SPX25071 SFP-45%RW, 1250mm wide

PPCSPX25071
SPX25071 Forged Carbon SFP is a 140°C TG epoxy short fibre prepreg system (SFP) suitable for thinner wall sections and lower pressure processing than traditional Carbon Fibre SMC (CSMC). 
€83.49 €83.49 Tax incl. €69.00 Tax excl.

Carbon-Epoxy Prepreg VTC401-CBX400-+-45º-38%RW-1270 mm

SHD2097-1270
VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture.
Last items in stock
€87.12 €87.12 Tax incl. €72.00 Tax excl.

245 g/m2 Carbon - Epoxy Prepreg MTC510-C245T VWEAVE-HS-3K-42%RW Twill 2x2

MTC510C245TVW
 (1)
MTC510 Carbon-epoxy prepreg is manufactured with a high tenacity epoxy resin prepared to cure between a variable temperature range of 80 ° C and 120 ° C. It is used to manufacture composite parts. The carbon twill fabric comes in a finish in which the diagonals, typical of twill weave, converge in the center of the sheet forming a V pattern.
€95.59 €95.59 Tax incl. €79.00 Tax excl.

Carbon-Epoxy MTC275-C650T-HS-12K-36% RW Twill 2 x 2 of 650 g/m2, width 1250 mm

MTC2756501237
Carbon-Epoxy prepreg MTC275 of 650 g/m2 is designed to give excellent clarity and surface finish out of autoclave. MTC275 can be supplied on a variety of fabrics and in UD format. To be combined with the surface prepreg MTM275-C245T-HQ-HS-3K-42%RW.
Out-of-Stock
€102.85 €102.85 Tax incl. €85.00 Tax excl.

98 gsm Plain Carbon-Epoxy Prepreg VTC401-C98PW-ST-HS-3K- 45%RW, Width 1020 mm

SHD2413-1020
VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture.
€113.14 €113.14 Tax incl. €93.50 Tax excl.

PSB Bulk Carbon-Epoxy Prepreg for Tooling

PSB581-1250
PSB Bulk Carbon material is designed to give a high class finish with reduced pre-paint preparation and versatile out of autoclave curing together with the surface prepreg OPS75. It can be supplied with carbon or glass fabric reinforcement.
€113.74 €113.74 Tax incl. €94.00 Tax excl.

OPS 75 (DF259) Surface Carbon Prepreg for Tooling

OPS75 material is designed to give a high class finish with reduced pre-paint preparation and versatile out of autoclave curing. It can be supplied with carbon or glass fabric reinforcement. The standard system comprises of 1 layer of OPS75 surface ply and 1 layer of PSB75 bulk ply. Typical applications: Automotive Body Panels – Out of Autoclave
€114.95 €114.95 Tax incl. €95.00 Tax excl.

Cosmetic Carbon Prepreg MTC275-C416T-HS-6K-38%RW Twill 2x2 of 416 g/m2

WMTC275-C416T
MTC275 Prepreg is designed to give excellent clarity and surface finish out of autoclave. MTC275 can be supplied on a variety of fabrics and in UD format. To be combined with the surface prepreg MTM275-C245T-HQ-HS-3K-42%RW.
€120.09 €120.09 Tax incl. €99.25 Tax excl.
Product added to wishlist