Tax incl. Tax excl.

Glass / Epoxy

25 gsm Plain Glass-Epoxy Prepreg VTC401-G25-PW-70%RW, 1030 mm wide

SHD3295-1030
VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture.
€48.00 €58.08 Tax incl. €48.00 Tax excl.

25 gsm Plain Glass-Epoxy Prepreg VTC401-G25-PW-70%RW, 1270 mm wide

SHD2597-1270
VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture.
Out-of-Stock
€48.00 €58.08 Tax incl. €48.00 Tax excl.

50 gsm Plain Glass-Epoxy Prepreg VTC401-G50-STYLE 1080-50% RW, Width 1270 mm

VTC401G50
VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture.
€49.75 €60.20 Tax incl. €49.75 Tax excl.

800 g/m2 Quadriaxial Fire Retandant Glass-Epoxy Prepreg FRVC411 EQX800 32%RW, 1270 mm width

SHD1464127
FRVC411 is a flame retardant epoxy resin system designed to cure between 65°C and 120°C allowing flexibility in component manufacture. It is a toughened, flame retarded epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements. Typical...
€52.35 €63.34 Tax incl. €52.35 Tax excl.

200 gsm Twill Glass-Epoxy Prepreg VTC401-G200T-45%RW, Width 1230 mm

VTC401G200T
VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture.
€58.95 €71.33 Tax incl. €58.95 Tax excl.

MTFA500 Epoxy Resin Adhesive Film for Prepregs, 1250mm

MTFA500150
MTFA500 (DF044) Adhesive Film  MTFA500 (DF044) adhesive resin film is designed to cure between 80 and 120°C, allowing flexibility in component manufacture.  
€59.00 €71.39 Tax incl. €59.00 Tax excl.

105 gsm Plain Glass-Epoxy Prepreg MTC510-G105-PW-45%RW, 1270 mm wide

SHD3073-1270
The carbon-epoxy prepreg MTC510 is manufactured with an epoxy resin prepared to cure within a variable temperature range of 80°C to 120°C.It is a high-toughness epoxy resin designed for the fabrication of parts that can be supplied with a wide variety of fibers and in a unidirectional format. Typical Applications: General Roll Width: 1270 mm
€63.35 €76.65 Tax incl. €63.35 Tax excl.

OPS 75 (DF259) Surface Glass Prepreg for Tooling

OPS75GLASS-1270
OPS75 material is designed to give a high class finish with reduced pre-paint preparation and versatile out of autoclave curing. It can be supplied with carbon or glass fabric reinforcement. In this case, we supply this prepreg with a 300 sqm glass fabric.Typical applications: Automotive Body Panels – Out of Autoclave
€69.00 €83.49 Tax incl. €69.00 Tax excl.

300 g/m2 Satin Fire Retandant Glass-Epoxy Prepreg FRVC411-G300-8HS-38%RW, 1270 mm width

SHD1771-1270
FRVC411 is a flame retardant epoxy resin system designed to cure between 65°C and 120°C allowing flexibility in component manufacture. It is a toughened, flame retarded epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements. Typical...
€77.00 €93.17 Tax incl. €77.00 Tax excl.

Glass-Epoxy Prepreg VTC401-EBX600-36%RW, Biaxial +-45º, 600 g/m2

PPEVVTC401
VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture.
€78.60 €95.11 Tax incl. €78.60 Tax excl.

E-glass-Epoxy Prepreg MTC510-UD600-EGLASS-35%RW, Width 300 mm

SHD2465-300P
MTC510 is an epoxy resin system designed to cure between 80°C and 120°C allowing flexibility in component manufacture. It is a toughened epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format.
€79.00 €95.59 Tax incl. €79.00 Tax excl.
Product added to wishlist