ALEXIT® BladeRep Pore Filler 6 Polyurethane Putty
By buying this product you can collect up to
4
points.
Your cart will total 4
points that can be converted into a voucher of
€0.40.
ALEXIT® BladeRep Pore Filler 6 is a solvent free, two-component polyurethane filler designed to seal any surface prior to applying BladeRep LEP 9 or BladeRep Topcoat 12. It fills pin holes and minor defects on GRP substrates and cures to an easily sandable surface.
ALEXIT® BladeRep Pore Filler 6 is a solvent free, two-component polyurethane filler designed to seal any surface prior to applying BladeRep LEP 9 or BladeRep Topcoat 12. It fills pin holes and minor defects on GRP substrates and cures to an easily sandable surface.
ALEXIT® BladeRep Pore Filler 6 is designed for filling small imperfections such as pin holes on wind turbine rotor blades.
ALEXIT® BladeRep Pore Filler 6 is available in grey.
Gel time : 5-10 minutes at 23 ° C / 73 ° F.
Spatula application.
Sandable manually after: after 2 hours at 23 ºC.
Sandable mechanically after: 3 hours at 23 ºC.
Type of supply
ALEXIT® BladeRep Pore Filler 6 x 380 g, supplied in metallic kegs of 300 g + 80 g of hardener 6
ALEXIT® BladeRep Pore Filler 6 x 7 kg, supplied in metallic kegs of 6 kg + 1 kg of hardener 6