By buying this product you can collect up to
2
points.
Your cart will total 2
points that can be converted into a voucher of
€0.20.
ISO-NPG Topcoat is based on premium isophthalic-neopentylglycol polyester resin and is especially suited for products exposed to water and less aggressive chemicals at varying temperatures.
Key applications for ISO-NPG polyester topcoats includes swimming pools, marine, sanitary articles, wind energy, automotive bodywork etc.
The "TC 976 SMK" is a topcoat based on isophthalic Neopentyl Glycol resin, thixotropic and pre-accelerated, ideal for the production of high-quality sanitary articles in contact with water. It offers excellent long-term resistance to hot water and thermal shocks.
It is applied with a brush in long, even strokes until a film thickness of 0.6 – 0.8 mm is achieved. The topcoat and workshop temperature should be maintained between 15°C and 25°C.
Gel time at 20°C with 2% Butanox M-50: approximately 8-10 minutes
This product is not suitable for application in molds.
TC 976 SMK x 1 kg, supplied with 20 g of PMEC catalyst
TC 976 SMK x 5 kg, supplied with 100 g of PMEC catalyst
TC 976 SMK x 25.5 kg, supplied with 0.5 kg of PMEC catalyst
A gelcoat should not be applied over an old gelcoat as it will peel off over time. Even if you sand the old gelcoat. To apply a gelcoat/topcota, you would need to remove the old gelcoat and then apply a new resin and fiber laminate. Another option would be to sand the old gelcoat, then apply an epoxy primer and finally 2-3 coats of 100 g/m2 each of a high-resistance polyurethane paint.
Cookie preferences
Español
Français
Deutsch
Italiano
Português
