Fenform™ Uncured Silicone Sheet for Vacuum Molding F999 UC SHT 1000, 1 mm S202 Grey

Fenform™ Silicone Sheet for Vacuum Molding

With high resistance to both tearing and creasing, FenForm™ provides the reliable, high quality solution required in vacuum moulding, laminating and ‘release cloth’ methods of composite production.

FenForm™ is reusable, providing a cost effective and environmentally-friendly alternative to disposable plastic bags in the VARTM (Vacuum Assisted Resin Transfer Moulding) and SCRIMP (Seemann Composites Resin Infusion Moulding) processes.

The silicone material is also flame resistant which provides an extra level of safety within your application. It provides excellent UV and ozone resistance, as well as strong chemical resistance, making it the ideal solution for your composite manufacturing needs.

General Information:  

• Designation:   FenForm 50          
• Working Temperature: R.T.I. 150°C - Max 250°C      

• Shelf Life (Uncured): 6 months from date of manufacture when stored at 24°C wrapped as supplied. This will be extended when frozen.                                                                               
• No finished thickness: 1 mm
• Roll width: 1000 mm
  
  

Recommended Curing Conditions

Press cure for 5 minutes at 116°C with 200psi (1.4MPa) of pressure.

FenForm^TM Advantages:

• Reusable (environmentally friendly)

• Improved ergonomics for operators

• Excellent UV and ozone resistance

• Cost effective alternative to disposable bags

• Good chemical resistance

• Highly durable over a wide temperature range (-40°C to 200°C)

• High tear resistance

• High elongation with low modulus

• Flame resistant

• Will not crease like nylon film

• Translucent sheeting so resin flow can be observed

• Competitively priced

FenForm^TM Typical Physical Properties:

• Standard thickness of 1mm to 3mm (0.04” to 0.125”)

• Standard widths of up to 1450mm (57”)

• Available in both cured and uncured

• Cured material has fine fabric impression to aid removal.

• Standard colors of translucent and grey

Markets Served:

• Aerospace

• Wind Power

• Military

• Marine

• Electronics

Type of supply

FenForm^TM silicone sheeting x 1 m2, supplied rolled in cardboard box

FenForm^TM silicone sheeting x 5 m2, supplied rolled in cardboard box

FenForm^TM silicone sheeting x 25 m2, supplied rolled in cardboard box