By buying this product you can collect up to
2
points.
Your cart will total 2
points that can be converted into a voucher of
€0.20.
Flashbreaker® tapes are high temperature/ high tensile polyester films coated on both sides with pressure sensitive silicone adhesive.
Flashbreaker® tapes are high temperature/ high tensile strength polyester films coated with a pressure sensitive silicone adhesive for oven or autoclave cures up to 204°C. The Flashbreaker® tapes have high visibility when placed on parts and molds.
Flashbreaker® pressure sensitive tapes are used for multi-purpose functions in metal bond and composites, such as holding down vacuum bagging materials, thermocouple wires, masking-off, chem-milling protection or in riveting shops. Flashbreaker® tapes remove easily after cure.
• Flashbreaker® tapes can control bond lines and make removal of resin flash easier, reducing clean up effort.
• Fix position of consumable materials to avoid process errors and improve part quality.
• High visibility orange colour makes removal easier to inspect and reduces risk of leaving tape in place.
| Maximum use temperature | 204°C |
| Carrier type | Polyester |
| Adhesive type | Silicone |
| Colour | Blue / Orange |
| Total thickness | 55 µm (0,0022 inch) |
| Film thickness | 25 µm (0,001 inch) |
| Adhesive thickness | 30 µm (0,0012 inch) |
| Elongation at break | 100 % |
| Shelf life | 18 months from date of shipment when stored in original packaging at 22°C |
| Width | Length | |
|---|---|---|
| 2,54 cm (1 inch) | 66 m (72 yards) | |
| 5,08 cm (2 inches) | 66 m (72 yards) | |
Product comes on plastic core, helping to reduce FOD in a clean room environment.
The maximum use temperature is dependent upon the duration at maximum temperature and is process specific, we recommend testing prior to use.
Cookie preferences
Español
Français
Deutsch
Italiano
Português
