Tax incl. Tax excl.
  • New
Crestafire® GCS 1001 PA Intumescent flame retardant gelcoat, spray application

Crestafire® GCS 1001 PA Intumescent flame retardant gelcoat, spray application

GCS1001PA-25
1 Items
Last items in stock
€457.19

By buying this product you can collect up to 45 points. Your cart will total 45 points that can be converted into a voucher of €4.50.

€457.19 Tax incl. €457.19 Tax excl.

Crestafire® GCS 1001PA is a pre-accelerated, low smoke fire retardant intumescent polyester based gelcoat. It incorporates new intumescent technology and has been formulated for spray application. When exposed to fire, Crestafire® GCS 1001PA forms a foamed cellular charred layer on its surface, which offers protection to the whole composite. Crestafire® GCS 1001PA is available in a restricted range of colours and is designed to be post-painted.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

Crestafire® GCS 1001PA is a pre-accelerated, low smoke fire retardant intumescent polyester based gelcoat. It incorporates new intumescent technology and has been formulated for spray application. When exposed to fire, Crestafire® GCS 1001PA forms a foamed cellular charred layer on its surface, which offers protection to the whole composite. Crestafire® GCS 1001PA is available in a restricted range of colours and is designed to be post-painted.

Formulation

Crestafire® GCS 1001PA should be allowed to attain a working temperature between 23°C-25°C before use for best spraying application. Stir well by hand or with a low shear stirrer to avoid aeration and then allow to stand to regain thixotropy. Crestafire® GCS 1001PA requires only the addition of a medium reactivity MEKP (50%) type catalyst to start the curing reaction. The catalyst should be added at 2.0% into the gelcoat and then thoroughly incorporated with a low shear mechanical stirrer where possible.

 

Certifications

Cured composite laminates manufactured with Crestafire® P1-3001PA and Crestafire® GCS 1001PA gelcoat can achieve HL2 - R1/R7/R10/R17 classification according to European standard EN 45545-2:2013.

 

Resin caracteristics

The gel time of this resin at 20°C with 1.5% PMEC 50% catalyst is 18 to 22 minutes.

The deformation temperature under load (1.80 MPa) is 60°C when the resin is fully cured (see technical data sheet).

Type of Supply

Crestafire® GCS 1001 PA Intumescent Fire Retardant Gelcoat, spray application x 1 kg, supplied with 20 g of PMEC catalyst

Crestafire® GCS 1001 PA Intumescent Fire Retardant Gelcoat, spray application x 5 kg, supplied with 100 g of PMEC catalyst

Crestafire® GCS 1001 PA Intumescent Fire Retardant Gelcoat, spray application x 25 kg, supplied with 0.5 kg of PMEC catalyst

UV resistance
No
Colour
White
Flexible
No
Tixo
No
Low shrinkage
Yes
Fire retardant
Yes
Low styrene emission
Yes
Certification
Yes
Food contact
No
1 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as DACHSER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR/DPD and GLS.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR or Correos EXPRESS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR or Correos Express as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or Dachser.

* Shippings to Portugal will be always carried by Torrestir

Download Technical Data Sheets                                         

TDS Crestafire® GCS 1001 PA Gelcoat EN                          

Customers who bought this product also bought:

Product added to wishlist