300 gsm Forged Carbon Prepreg GG 400 12K C24mm - X1 120BS-50%RW, 127 cm wide
By buying this product you can collect up to 11 points. Your cart will total 11 points that can be converted into a voucher of €1.10.
GG 400 12K C24mm - X1 120BS-50%RW forged carbon prepreg is a recycled carbon fiber prepreg developed for aesthetic applications. It is made of the combination of non-woven fabric and chopped tow fibres impregnated with an epoxy resin system.
This product offers an out-of-the-ordinary surface appearance.
GG 400 12K C24mm - X1 120BS is formulated for autoclave and can also be processed using compression molding process.
Quite acceptable results have been obtained by curing this prepreg simply under vacuum (-950 mbar) and in an oven, out of an autoclave (OoA). Parts made in this way will require a subsequent varnishing treatment to remove the small surface porosity.
GG 400 12K C24mm - X1 120BS-50%RW forged carbon prepreg is a recycled carbon fiber prepreg developed for aesthetic applications. It is made of the combination of non-woven fabric and chopped tow fibres impregnated with an epoxy resin system.
This product offers an out-of-the-ordinary surface appearance.
GG 400 12K C24mm - X1 120BS is formulated for autoclave and can also be processed using compression molding process.
Quite acceptable results have been obtained by curing this prepreg simply under vacuum (-950 mbar) and in an oven, out of an autoclave (OoA). Parts made in this way will require a subsequent varnishing treatment to remove the small surface porosity.
Specifications
- Suitable for a wide range of temperature applications: 80-130 °C.
- Good self-adhesive properties.
- Optimized for autoclave.
- Very long lifespan at room temperature: 21 days at 21 °C.
- Roll Width: 127 cm
- Carbon Fiber Surface Weight (dry): 300 g/m² of chopped threads + 100 g/m² of non-woven fabric
- Epoxy Resin Surface Weight: 400 g/m²
- Total Prepreg Surface Weight: 800 g/m²
- Chopped Thread Size (dry): 24 mm
- Carbon Fiber Filament Type: 12K
- Substrate: 100 g/m² non-woven carbon fabric
- Epoxy Resin Reference: X1-120 BS"
X1-120 BS Epoxy Resin Specifications
- Slightly pigmented epoxy resin
- Resin shelf life at 21ºC: 21 days
- Resin shelf life stored at -18ºC: 12 months
- Gel time at 140 ºC: 135 s
- Good mechanical and aesthetic/cosmetic properties
- Tg (DMA) Onset [°C]: 136ºC*
- Tg (DMA) Tanδ [°C]: 156ºC*
*conditions: cured 105 min @ 130°C"
Prepreg Curing Conditions
GG 400 12K C24mm - X1 120BS-50%RW can be successfully polymerized by autoclave in a temperature range of 80oC y 130oC.
Recommended curing conditions: 90 min @ 130 ºC and 6 Bar pressure, (heat up 2-3 oC/min): please check the TDS available for alternative cure cycles.
Alternatively, it can be cured under vacuum out of the autoclave for 6 hours at 90 oC.
Type of Supply
300 gsm Forged Carbon Prepreg GG 400 12K C24mm, 127 cm wide x 1 m lineal
300 gsm Forged Carbon Prepreg GG 400 12K C24mm, 127 cm wide x 5 m lineal
300 gsm Forged Carbon Prepreg GG 400 12K C24mm, 127 cm wide x Rollo de 25 m lineales