Spray Varnish Acrylic single-Component, UV-resistant

Varnish resin base thermoplastic acrylic solvent-drying ultra-fast. Available in gloss and matte.

FEATURES

- Fast drying.
- Good hardening.
- Excellent adhesion.
- Great durability of the brightness.
- Ease of application and repainted.
- Good elasticity.
- Outstanding resistance to water.
- Does not yellow.
- Good behavior with the UV rays.

APPLICATIONS

The Acrylic Varnish can be applied on a multitude of materials, to those who want to protect and at the same time enhance its brightness. You will get different finishes depending on the number of layers applied.

- Wood - Materials-painted - Some plastics
- Wicker - Cork - Iron
- In general, all surfaces barnizables porous or non-porous

On painted surfaces to make a preliminary test to observe the behavior, as this could crack the previous layer.

INSTRUCTIONS FOR USE

- Shake well the aerosol before using, approximately for one minute after hearing the noise of the mixer.
- Apply on clean, dry surfaces. About plastic PS and PP, apply a layer of anchor. On any plastic surface, try first the behavior of the product.
- Apply in thin layers for best results, always is better three thin layers than one thick, repintable to ten minutes with the same paint.
- Invest in the spray to purge the valve after use, if it gets clogged the diffuser and replace it with a new one.
- Do not apply on connected equipment and use in well-ventilated areas.
- When applied over other paints recent or old perform a preliminary test, because occasionally, it may remove the paint of the support to be varnished.
- Ask for safety data sheets.

PHYSICAL CHARACTERISTICS

Type Binder: thermoplastic Acrylic
Color: Transparent
Shine 60º (ASTM D-523 ISO 2813) <70% bright; 20-35 Satin; <20 Mate
Drying to touch ( ASTM D-1640 ISO 1517 ): 10’
Full cure ( ASTM D-1640 ISO 1517 ): 12 h
Thickness of dry layer ( ASTM D-823 ISO 2808 ): 15 µ/layer
Adhesion (ASTM D-3359 ISO 2409 ): 4 B
Theoretical yield ( painted in continuous ): 2 m2
Diluent: Acetate Butyl
Product life: >5 years
Overcoating: After 10’
Resistance of the painted heat: 150ºC
Conditions of application: Relationship environment minimum 8 ° C
Relationship surface 5 ° c to 50ªC
Humidity Max. 85 % R. H. P

* Grip tests have been carried out on steel.

Supply type

Clear acrylic single-component, UV-resistant x Aerosol of 400 ml, supplied in metal container