Elastosil M 4600 A/B Addition-Curing Translucent Silicone Rubber for Moulds Shore A 20
By buying this product you can collect up to 5 points. Your cart will total 5 points that can be converted into a voucher of €0.50.
Elastosil M 4600 A/B is a pourable, addition-curing, two-component transparent silicone rubber for flexible moulds that vulcanizes at room temperature. Excellent resistance to polyester casting resins, epoxy or polyurethane. Shore A 20 hardness.
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. Excellent resistance to polyester casting resins, epoxy or polyurethane. Hardness: Shore A 20.
ELASTOSIL®M 4600 A/B has the advantage of being transparent. This makesit possible to cut onepart molds under visual control along a parting line which has been established before or is determined by the shape of the model, a method which often saves making a two-or multi-part mold.
The viscosity of component A is 20,000 mPas, while the component B has a viscosity of 12,000 mPas.
Elongation at break of the vulcanized rubber: 800 %
Linear shrinkage: Very low (< 0.1 %)
Mixing ratio by weight Component A: Compoente B (10: 1)
Processing time or gel time at 23 °C: 90 minutes.
Type of supply
Elastosil M 4600 A/B Addition Curing Silicone Rubber x 1.1 kg
Elastosil M 4600 A/B Addition Curing Silicone Rubber x 5.5 kg
- Food contact