Mirka Polarshine 45 Polishing Paste
By buying this product you can collect up to 4 points. Your cart will total 4 points that can be converted into a voucher of €0.40.
Polarshine 45 is a compound for polishing of gelcoats and topcoats. It is suitable for polishing and removal of sanding marks from P1000 and finer depending on application and polishing pad with Mirka’s unique products. Polarshine 25 is suitable for machine application.
Fast cutting, coarse polishing paste that helps you save time and achieve a perfect deep gloss finish. Removes P600 sanding scratches and finer scratches quickly and permanently. Designed for hard surfaces and coatings, especially in the marine sector. Used in both production and restoration processes, Polarshine 45 is ideal for one-step polishing of gel coat surfaces on white and light colors. For darker colors, we recommend a second step with Polarshine 10, to remove snails and holograms.
|VOC||ca 16,8 %|
|Viscosity||ca 37 000 cP|
|Density||ca 1.23 g/ml|
High gloss finishing process for gel coats, topcoats and Primecoat or Duratec type finishing fillers
- We start from a surface with a 600/800 grit sandpaper finish
- Perfectly cured product (21 days at 23ºC)*
- Apply Polasrhine 45 dry with a wool beret. Use with a low speed polisher.
- Apply Polarshine 10 dry with a wool beret
*If the finished product is not well cured, distortions will appear due to the temperature reached in the process.
Type of supply
Polarshine 45 Polishing Paste from P1000 and finer x 1 l (0.264 gal), supplied in plastic kegs