Milled Fibreglass

Reference WFV0001-1

EAN 8431252110148

Stock 10 units

€12.30

€12.30 VAT excl. €14.88 VAT incl. · Spain

Tax excluded

By buying this product you can collect up to 1 point points. Your cart will total 1 point that can be converted into a voucher of €0.10.

Milled fiberglass used as a reinforcement to improve impact resistance on thermosetting resins (mainly polyester, vinylester, epoxy or polyurethane).

Choose the type of supply

‎

Calculate Shipping Cost

Milled fiberglass used as a reinforcement to improve impact resistance on thermosetting resins (mainly polyester, vinylester, epoxy or polyurethane). Particularly used for reinforcement of casting resins.

μm	Fibre
80 μm	VS1304V
160 μm	FM1320K

Type of supply

Milled fiberglass 80 μm x 1 kg, supplied in plastic bag

Milled fiberglass 80 μm x 5 kg, supplied in metallic kegs

Milled fiberglass 80 μm x 25 kg, supplied in sacks

Milled fiberglass 160 μm x 1 kg, supplied in plastic bag

Milled fiberglass 160 μm x 5 kg, supplied in metallic kegs

Milled fiberglass 160 μm x 25 kg, supplied in sacks

In stock 10 Items

EAN13 8431252110148

Milled Fibreglass 153.19KB

Technical Data Sheet - English

Download

Milled Fibreglass 66.57KB

Security data sheet ES

Download

Customers who bought this product also bought:

PU250 kgm3 Rigid Polyurethane Foam Sheets 550 x 320 x 20 mm

Sandwich cores for composites

PU100 kg/m3 Rigid Polyurethane Foam Sheets 550 x 320 x 20 mm

PU550320-20-100

€16.75 €16.75 VAT excl.

Rigid Polyurethane Foam Sheets Density: 100 kg/m3 Size: 550 x 320 x 20 mm

View product

Resins for composite materials

Resoltech 1070 ECO Clear Hand Lay-up Epoxy Resin

RESOLTECH

WRE1070ECO

€60.82 €60.82 VAT excl.

37% Bio-sourced epoxy system for room temperature cure & mould release Specially recommended for structural laminates and self leveling top-coats. Excellent wetting properties on all reinforcements Enables use of polyester topcoat without inhibition of polyester.

View product

RAL 9018 Crystic GT-600 PAX Topcoat isoftálico - BRUSH

Gelcoats and topcoats

RAL 9018 Crystic GT-600 PAX isophtalic Topcoat - BRUSH

TCT9018B

€18.94 €18.94 VAT excl.

The topcoat Crystic® Ral 9018 GT-600 is a high-performance isophtalic topcoat, pre-accelerated and formulated for application with brush or roller.

View product

Unidirectional Carbon fabric 24 K and 300 g / m2

Out-of-Stock

Reinforcement fibres

Unidirectional Carbon fabric 24 K and 300 g/m2, width 60 cm

WTCU300UQ

€25.00 €25.00 VAT excl.

Unidirectional Carbon fabric 24 K and 300 g/m2 is suitable for production of composite parts and tools with epoxy, vinyl ester and urethane-acrylic (Crestapol) resins. Ideal for specific reinforcements in certain directions of the composite part or tool. Supplied covered with a protective and sealing plastic film.

View product

Resins for composite materials

Resoltech 1070 Hand Lay-Up Clear Epoxy Resin

RESOLTECH

WRE1070

€62.41 €62.41 VAT excl.

RESOLTECH 1070 is a hand lay-up epoxy laminating system formulated to produce clear laminates and high gloss coatings with good UV stability and good mechanical properties while retaining some flex for improved fatigue performance such as for surfboards. Very fast hardening in film.

View product

200 g/m2 FlaxPly BL 200, 100 cm Roll width

Reinforcement fibres

200 gsm FlaxDry BL 200, width 100 cm

L-FLAXDRY-BL200

€35.95 €35.95 VAT excl.

FLAXDRY is a range of flax reinforcements “ready to be used” in composite manufacturingfor hand lay-up, infusion, RTM...This range of flax reinforcements has been developed to mainly enhance the vibration absorption qualities, mechanical properties, weight reduction and aesthetic aspect of composite parts. It also allows the development of greener material.

View product

Resin pigments, fillers and additives; solvents and cleaners

Microcuarzo Q-50

WAA0150

€3.75 €3.75 VAT excl.

Microcuarzo 5 kg Q-50

View product

Tejido de carbono tafetán de 3 K y 160 g/m2

Reinforcement fibres

160 g/m2 3K Plain Weave Carbon Fabric, width 100 cm

WFC160T

€36.00 €36.00 VAT excl.

Carbon fabric of 160 g/m2 for high performance applications where high strength and low weight is required.

View product

Tools and equipment for composites

Set of 4 Metal Spatulas

UU2004-1720

€5.50 €5.50 VAT excl.

Set of 4 different-sized metal spatulas. Sizes: 50, 80, 100 y 200 mm.

View product

Gelcoats and topcoats

RAL 5022 Crystic GT-600 Isophthalic Gelcoat - BRUSH

€18.32 €18.32 VAT excl.

Crystic® Gelcoat GT-600 is a high performance isophthalic gelcoat. It is pre-accelerated and formulated for brush application. It has been developed to have excellent intrinsic water and weather resistance.

View product

Milled Fibreglass

Type of supply

Customers who bought this product also bought:

PU100 kg/m3 Rigid Polyurethane Foam Sheets 550 x 320 x 20 mm

Resoltech 1070 ECO Clear Hand Lay-up Epoxy Resin

RAL 9018 Crystic GT-600 PAX isophtalic Topcoat - BRUSH

Unidirectional Carbon fabric 24 K and 300 g/m2, width 60 cm

Resoltech 1070 Hand Lay-Up Clear Epoxy Resin

200 gsm FlaxDry BL 200, width 100 cm

Microcuarzo Q-50

160 g/m2 3K Plain Weave Carbon Fabric, width 100 cm

Set of 4 Metal Spatulas

RAL 5022 Crystic GT-600 Isophthalic Gelcoat - BRUSH

Departments

Opening hours