By buying this product you can collect up to
2
points.
Your cart will total 2
points that can be converted into a voucher of
€0.20.
Crystic Resin VE679PA is a pre-accelerated thixotropic DCPD modified vinylester resin. Developed for use as a skin coat in marine and tooling applications. Excellent blister resistance and reduced print through. It has a 23 minute geltime and is Lloyd´s Register approved.
Crystic Resin VE679PA is a pre-accelerated thixotropic DCPD modified vinylester resin. Developed for use as a skin coat in marine and tooling applications. Excellent blister resistance and reduced print through.
Crystic VE 679PA has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable mouldings with an enhanced surface finish.
Crystic VE 679PA is approved by Lloyd’s Register of Shipping for use in the construction of craft under their survey.
Crystic VE 679PA must be thoroughly stirred and allowed to attain workshop temperature (18°C - 20°C) before use. It needs only the addition of a catalyst to start the curing reaction. Either Butanox LPT or Butanox M50 catalyst can be used, which should be added at 2% into the resin.
Gel time with 2% of MEKP for 100 g at 25 ºC: 23 min.
Deflection Temperature under load† (1.80 MPa): 94 ºC, after 24 hrs at 20°C + 3hrs at 80°C.
Crystic VE679PA Hand Lay-Up Vinyl Ester-DCPD resin x 1 kg, supplied with 20 g of MEKP
Crystic VE679PA Hand Lay-Up Vinyl Ester-DCPD resin x 5 kg, supplied with 100 g of MEKP
Crystic VE679PA Hand Lay-Up Vinyl Ester-DCPD resin x 25 kg, supplied with 0.5 kg of MEKP
You might also like
Cookie preferences
Español
Français
Deutsch
Italiano
Português
