Tax incl. Tax excl.
  • -10%
Quick Wash Primer (Primer for Metals)

Quick Wash Primer (Primer for Metals)

UU5011-1067
8 Items
€16.88

By buying this product you can collect up to 1 point. Your cart will total 1 point that can be converted into a voucher of €0.10.

€18.76
-10%
€16.88 Tax incl. €13.95 Tax excl.
Tax included

Primer/Adherence promoter applied directly to bare metals such as steel, zinc and aluminium. Fast drying and repaintable even wet on wet after evaporation. Excellent anti-corrosive properties. To be used before any filler or primer. Never use polyester based products over Quick Wash Primer.

Supply

 Calculate Shipping Cost
Shipping:
0
to Spain via
Estimated delivery: No estimated delivery specified day(s)
Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

Primer/Adherence promoter applied directly to bare metals such as steel, zinc and aluminium. Fast drying and repaintable even wet on wet after evaporation. Excellent anti-corrosive properties. Never use polyester based products over Quick Wash Primer.

Drying time: 15 min at 20 ºC.

Type of supply

Quick Wash Primer x 400 ml, supplied in metallic aerosol

8 Items

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as DACHSER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR/DPD and GLS.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Epoxy adhesives and putties ...................................................... 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR/DPD or GLS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR/DPD or GLS as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or DACHSER.

* Shippings to Portugal will be always carried by Torrestir

Customers who bought this product also bought:

Product added to wishlist