Chemlease® Mold Cleaner EZ
By buying this product you can collect up to 1 point . Your cart will total 1 point that can be converted into a voucher of €0.10.
Chemlease® Mold Cleaner EZ is a special blend of solvents designed to dissolve and remove wax and dirt from composite molds. Ideal for preparing composite mold surfaces for the application of Chemlease® Mold Sealers and Releases. Also excellent for cleaning brushes and equipment.
Chemlease® Mold Cleaner EZ is a special blend of solvents designed to dissolve and remove wax and dirt from composite molds. Ideal for preparing composite mold surfaces for the application of Chemlease® Mold Sealers and Releases. Also excellent for cleaning brushes and equipment.
Application
1. Chemlease® Mold Cleaner EZ should be applied to the mold surface with a clean 100% cotton cloth. While the mold surface is still wet, vigorously wipe the mold dry with a second clean, dry 100% cotton cloth.
2. Frequently exchange saturated cloths with new, clean cloths.
3. Repeat process several times until all residue (dirt, dust, grease, moisture, etc.) is removed (at least two cleanings are recommended.)
4. The mold is then ready for application of the mold sealer or mold release.
Note: If you plan to use compounds or glazes etc. prior to applying sealer and/or mold release, be sure to wipe clean with Chemlease® Mold Cleaner EZ after doing so, as most buffing compounds will not allow Chemlease® Sealers and Release Agents to work properly. Prolonged exposure on the mold surface (puddling, dipping, etc.) should be avoided.
Storage
Recommended storage temperature is between 10°C and 35°C. Keep container tightly sealed to prevent evaporation and/or contamination. If stored in cold temperatures, allow product to warm to room temperature prior to use.
Type of supply
Chemlease Mold Cleaner EZ x 100 g, supplied in metallic kegs
Chemlease Mold Cleaner EZ x 0,8 L, supplied in metallic kegs
Chemlease Mold Cleaner EZ x 3,8 kg, supplied in metallic kegs